turn your ignition switch off and then on in rapid sucession four times dash lights will blink and code can be reset
CHECK THE FUSE PANEL DASH & TAIL LIGHTS WORK FROM SAME FUSE
the slender rod that projects out from the tachometer, which is pushed to reset the trip odometer...when you turn it, the dash lights brighten or darken.
Where is the Dash board lights fuse of ford mondeo 2002 lx
reset brake wear display on dash board after changed rear disk brake ?
If all the dash lights are out, it is the switch that is the problem.other wise, you have to remove all the lowre pannels to get at the bolts that hold the dash cluster in.
Should be parking/tail/dash lights
The fuse is blown. They put the dash lights and tail lights on the same fuse so that if you are driving at night the absence of the dash lights will be made relevent to you in order to get your tail lights fixed.
mine was doing the same thing turned out to be a loose ground at the connection strip
To reset the dash light indicators on a Toyota Tundra the trucks ECU will need to be reset. The simple way of resetting the ECU requires disconnecting the battery for 5 seconds. When the ECU is reset the lights will be clear.
To reset the dash lights on a 2004 Scion xB, start by turning the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, and then turn the ignition off. Restart the vehicle, and the dash lights should be reset. If the issue persists, consult the owner's manual or a professional mechanic for further assistance.
airbag light is on dash