CHECK THE FUSE PANEL DASH & TAIL LIGHTS WORK FROM SAME FUSE
I have that same problem with a 2001 tacoma no power rear tail lights brake light works and nothing for dash lights i need answers i am stumped Any real answers to this please???
There is a wire harness. The bulbs tend to go out.
Check all fuses- many unrelated problemsCheck wiring to fuse boxCheck for loose ground Stop lights and shift interlock should be common circuitDash lights parking/tailights should be common circuit
I have a 1995 neon dodge and my dash lights will not come on or my tail lights and every time i change the airbag fuse and turn on the car the airbag fuse blows.
Check the fuse and relay marked TNS. check fuse fuse panel is labled with each fuse if you checked the fuse + the relays and everything is ok, it's your (DRL unit)or if you prefer = minus 150$!! Good luck and don't worry, it's really easy to change except for where they put this small box. (behind left side of dash!!)
Check for a blown fuse
A blown fuse can cause the dashlights and taillights to stop working on a 2001 Dodge 1500.
on my 99 Sephia the Blower is located under the dash on the passenger side.
If you dash lights are not working check that your parking/brake lights are working also check fuses for cig lighter and interior lights that may help get the dash light working again.
i have the same problem my dash light turns on when i turn on the interior lights but when i turn on only ........the dash light they wont turn on but they work when the interior lights are on ........so they do work .,...is there a separate fuse ?
If parking lights and dash lights are not working and fuse blows out, there might be a problem with battery corrosion. Check the components specific to the circuits of the affected lights. It might be loose.
they are fused separate but check to make sure someone has not turned your dash light brightness feature al the way to dim
bad bulbs and or blown fuse
Where is the Dash board lights fuse of ford mondeo 2002 lx
in dash lights
If all the dash lights are out, it is the switch that is the problem.other wise, you have to remove all the lowre pannels to get at the bolts that hold the dash cluster in.
sol