To reset the engine light on a 2005 Honda Civic, you can use an OBD-II scanner to clear the trouble codes, which will turn off the light. Alternatively, you can disconnect the negative battery terminal for about 10-15 minutes, then reconnect it. However, if the engine light remains on, it may indicate an underlying issue that needs to be addressed. Always ensure to diagnose and fix any problems before resetting the light.
To reset the check engine light on a 1998 Honda Civic located the blue 15 amp fuse in the engine bay fuse box. The fuse is labeled ECU, and will reset the check engine light when removed.
The check engine light on a 2004 Honda Civic can be reset by unplugging the ECU fuse in the engine bay fuse box. The ECU fuse is located is blue and rated at 15 amps.
To turn off a 2002 Honda Civic engine light it needs to be reset. Resetting the light can be done by either disconnecting the battery or removing the ECU fuse.
To reset the check engine light on a 1994 Honda Civic locate the fuse box in the engine compartment. Find the ECU fuse and pull it off for at least 5 seconds. This will erase all codes on the ECU.
Check engine lights alert drivers of immediate need on any mechanical issues that need to be cared for. After issues have been cleared the check engine will need to be reset. To reset the check engine light in a 2002 Honda Civic simply unplug the battery for five seconds.
remove the ecm fuse for 30 seconds will clear the codes.gmjim
Check engine codes on Honda vehicles such as a 1992 Honda Civic have to be manually reset. To do so, remove the ECU fuse located inside the engine bay.
have vehicle scanned to determine the problem and hae codes cleared
Have vehicle scanned to determine the problem and have codes cleared
disconnect battery and wait 10 sec reconnect battery
To reset the engine light on a 2002 Honda Civic Si, you can disconnect the negative battery terminal for about 10-15 minutes, which will clear the error codes. Alternatively, using an OBD-II scanner to read and clear the codes will also reset the light. Make sure to address any underlying issues that triggered the engine light before resetting it to avoid further problems.
its not a light,reset with your key