How do i reset a service engine light on a 2005 gmc c6500 cat engine
To reset the maintenance required light on a 2005 Toyota Corolla, turn the ignition switch to the "OFF" position. Press and hold the trip meter reset button on the dashboard while turning the ignition switch to the "ON" position (without starting the engine). Continue to hold the button until the maintenance light blinks and then goes out. Release the button, and the light should be reset.
To reset the maintenance light on a 2005 Toyota Avalon, start by turning the ignition key to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off, and when you turn it back on, the maintenance light should be reset. If it doesn't turn off, repeat the process.
i dont know how
Usually your oil needs changing. You have to reset the light yourself. Look in manual it will show how to reset it.
Two reset the maintenance required light on a 2005 Honda Accord all you have to do is hold the odometer reset button on the gage panel for about 30 seconds while the key is in the on position. Not running just in the on position. it will reset.
To reset the maintenance required light on a 2005 Honda Accord Hybrid, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After this, the maintenance light should turn off. If it doesn’t, repeat the process to ensure it was done correctly.
To reset the maintenance service indicator on a 2005 Mercedes SLK 350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn off the ignition and start the engine; the maintenance light should be reset. If the light remains, repeat the process.
To reset the maintenance light in a 2005 Honda Element, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, the maintenance light should turn off. Finally, turn the ignition off and then start the engine to ensure the light has been reset.
Press and hold the odometer reset button while at the same time turning the ignition switch to on. Do not start the engine. After around 5 seconds the maintenance required light will go out.
With the ignition switch in the off position, hold in the hold in the trip odometer. Now turn on your key and you will see a series of zeros begin to appear. Once that stops, your maintenance light will be reset.
To reset the maintenance required light on a 2005 Toyota Tundra, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal to the floor three times within five seconds. After doing this, turn the ignition off and then start the engine to check that the light has been reset.
To clear the maintenance required light on a 2005 Lexus RX330, turn the ignition to the "ON" position without starting the engine. Press the trip meter reset button on the dashboard until the trip meter displays "0." While still holding the button, turn the ignition off and then back to "ON." Release the button, and the maintenance light should reset.