Re-setting Service Reminder Light VT and VX 1.Ignition switch OFF. 2. Hold down the trip computer "UP" and "DOWN", arrow buttons that control the vehicle information screen. 3. Turn the ignition ON while holding the 2 switches down. 4. After about 3 seconds release both buttons. 5.Press and release the MODE switch, the "Service reminder s" hould appear on the instrument cluster. 6. Press and hold both the trip computer "UP" and "DOWN", arrow buttons until a BEEP is heard (about 3 seconds) 7. Release both buttons and turn the ignition OFF.
turn signal located on VT commodore
how do I reset my service engine light on my 1999 ford f150
How do you reset service indicator message for A 1999 Mercedes Benz ML320 after service A or B is completed?
To remove the driver's steering wheel airbag on a 1999 Holden Commodore you will need a special set of tools to remove the 4 to 6 security screws that are holding it in. If the vehicle came equipped with a airbag, it needs to have one to remain road safe.
To reset the service indicator on a 1999 Mercedes-Benz CLK, first, turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and back on to verify that the service indicator has reset. If it hasn't reset, repeat the process.
A combination of pulling and pushing the 2 speedo buttons at the same time. This should reset the service light.
you will need a scan tool to determine the cause and to reset
With an OBD2 scanner.
Have vehicle scanned to determine the problem
Check out G20.net
To reset the service indicator on a 1999 Mercedes-Benz CLK 320, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn the ignition off and start the engine. The service indicator should now be reset.
Hello , Does anybody knows how to reset the service message on E430 MB 199. Thanks Denis Hello , Does anybody knows how to reset the service message on E430 MB 199. Thanks Denis