0
Need to do service confirmed:
1- Door closed key position 1 (make sure you have the temp. screen up before starting) immediatly after turning to posistion one, press the reset button 3 times. and the battery voltage should come up.
2- page down to serivce data menu. Use plus and minus to select service data and hit page down to select.
3- Use plus and minus to scroll down to "confirm overall service" , then hit page down. It should say service confirmed.
4- Take the key out ant put back at position 2, the service message should be gone
I had the same issues with trying to reset the service codes for my M/B ML350. After looking everywhere and getting no help from the Mercedes dealerships, it turns out, the directions for resetting my service codes were right in my owners manual! I tried it and it worked the first time........I just can't figure out why Mercedes wouldn't tell their owners such a simple solution to a very irritating problem!
What else can I help you with?
What is Service d Mercedes ml350?
If your dashboard is lighting up with a "service D" light on your Mercedes ML350, it means it is time to take your car in for a service inspection. This is just a general warning that your car may need a checkup.
How do you reset scheduled service light on ML350 2011?
To reset the scheduled service light on a 2011 Mercedes-Benz ML350, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times quickly while the service light is illuminated. After that, turn the ignition off and then back on to check if the light has reset. If successful, the service light should no longer be displayed.
How do you reset the service light on a Mercedes ml350 2006?
To reset the service light on a 2006 Mercedes ML350, first turn the ignition to the "on" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off and back on. The service light should now be reset.
How do you reset service light on 2009 ml350?
To reset the service light on a 2009 Mercedes-Benz ML350, turn the ignition to position "2" (do not start the engine). Press the gas pedal three times within 10 seconds. After that, turn the ignition off, then back on to verify that the service light has been reset. If it remains on, repeat the process.
How do you reset ml350 service light?
To reset the service light on a Mercedes-Benz ML350, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds, then turn the ignition off. Finally, turn the ignition back to the "On" position to verify that the service light has been reset. If it remains on, repeat the process.
How do you reset the service b on a ml350 2010?
To reset the Service B indicator on a 2010 Mercedes-Benz ML350, turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn the ignition off and back on to verify that the Service B light has been reset. If the light remains, you may need to repeat the process.
How do you replace the battery on a 2005 Mercedes ML350?
battery died on my 05 ML350 someone gave me a jump and now everything went heywire! light on the dash kept blinking ,what is the fix
How do you fit daylight running lights to a 2003 Mercedes Benz ML350?
There is a module that you can buy [$40] for daylight running light. It is easy to install and comes with an instructions. Do you have a part number or name of supplier?
How do I change the break light on a ML350?
To change the brake light on a Mercedes-Benz ML350, first, open the rear hatch and locate the tail light assembly. Remove the screws or clips securing the tail light, then gently pull the assembly out. Disconnect the electrical connector, and replace the burnt-out bulb by twisting it counterclockwise. Reassemble the tail light by reversing the steps, ensuring everything is securely in place before testing the new brake light.
What type of chassis is typically used in light cars?
composite
How do you change a front left low beam light on a 2007 ML350?
after removing dust cover from low beam head light..the light socket will not turn (counter clock wise) is there a trick
What does the spanner light mean on 206?
spanner has a number next to it of how long until you require a service spanner has a number next to it of how long until you require a service
