0
To reset a Spanner symbol, you typically need to access the settings or configurations of the Spanner tool you are using. Look for an option to reset or clear the symbol settings, which might be found under preferences or tools menu. If you're using a specific software or platform, consult its documentation for precise steps, as the method may vary. After resetting, you may need to reconfigure any desired settings or symbols.
What else can I help you with?
How is the spanner symbol reset on a Peugeot 206?
To reset the spanner symbol on a Peugeot 206, turn the ignition key to the "ON" position without starting the engine. Press the trip reset button on the dashboard for about 10 seconds until the spanner symbol starts to blink, then release the button. Finally, press and hold the button again until the symbol disappears, indicating the reset is complete.
How do you reset the spanner symbol on the dash board of a 206 1.4hdi?
To reset the spanner symbol on the dashboard of a Peugeot 206 1.4 HDi, turn the ignition on without starting the engine. Press and hold the trip reset button on the dashboard, then turn the ignition off while continuing to hold the button. After a few seconds, turn the ignition back on, and the spanner light should reset. Release the button, and the warning light should now be gone.
Why does the spanner symbol stay on on a vauxhall astra bertone 2002 model?
The spanner comes up to indicate that the car is due for a service. It should be reset by the garage after the service is carried out.
What does the spanner symbol mean on a peugeot 106 quicksilver?
Teh spanner symbol means it's service time.
How do you get rid of service spanner on au falcon?
with ignition off hold done the button on the instrument cluster. turn ignition on. wait about 10 sec. the trip meter may reset but it will reappear to what it was before resetting the spanner symbol if done right. if done right. the spanner should dissappear.
What is the spanner mean on the dashboard Citreon C4 Picasso?
That is the service indicator symbol if it's just been serviced just take it back in and get them too reset it. Darren.
How do you reset service indicator for chery j3?
J3 chery how do you reset service spanner
Why the spanner symbol does not after service?
Becasue the car is fixed.
What does a car symbol with a spanner on it mean?
Service due
How reset a spanner of a polo vivo?
To reset the spanner light on a Polo Vivo, first turn on the ignition without starting the engine. Press the gas pedal fully three times within 10 seconds. After that, turn off the ignition. The spanner light should reset, indicating that the service reminder has been cleared. If it doesn’t reset, consult your vehicle's manual or a professional mechanic for further assistance.
How do you reset the service interval on a xantia?
Service Light Reset - Citroen Xantia (1997 on)Using button located within speedometer dial.Switch the ignition off.Press and hold button.Switch on the ignition.Keep the button depressed.Service Interval and "spanner" symbol will illuminate for five seconds
How do i reset Kangoo van spanner?
Ask at www.renaultforums.co.uk I'm sure you'll get the answer :-)
