t's not a problem, it is merely a reminder light so customers will be prompted to do the required maintenance.
Turn the ignition ON
Make sure the "ODO" is displayed, not "TRIP"
Press and hold the TRIP reset button
Turn the key off and back on
Hold the reset button until the lines on the ODO display disappear and the ODOMETER reading comes back.
answered by Liselle
You will find that info in the owners manual.
To reset the maintenance required light in a Scion TC, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off and then back on; the maintenance light should be reset. If it remains lit, repeat the process to ensure it was done correctly.
To reset the maintenance required light on a 2010 Scion xB, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After releasing the pedal, the maintenance light should turn off. If it doesn't reset, repeat the process.
how do i reset srs light on scion tc
1. Set your ODO to Trip A 2. Turn off ignition 3. Hold ODO button 4. Turn on ignition 5. Hold ODO button until Maintenance Required light stops flashing
maintenance with engine
how do i reset srs light on scion tc
The maintenance light,You will need to take it to a Dodge dealer to reset it. Or get a DBR-2 code scanner.BIG $$$
aperantly take the light out
The maintenance required light requires a scan tool to be reset.
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
To reset the maintenance required warning light on a 1989 Dodge Dakota, unhook the battery connector cables for 10 minutes. Reconnect them and start the vehicle.