To reset the maintenance required light in a Scion TC, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off and then back on; the maintenance light should be reset. If it remains lit, repeat the process to ensure it was done correctly.
how do i reset srs light on scion tc
You will find that info in the owners manual.
how do i reset srs light on scion tc
A scan tool is required.
To reset the maintenance required light on a 2009 Scion TC, turn the ignition switch to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, the maintenance light should turn off. If it does not reset, repeat the process.
To reset the maintenance required light on a 2010 Scion xB, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After releasing the pedal, the maintenance light should turn off. If it doesn't reset, repeat the process.
this light is letting you know that it's time to change the oil. Now if you had it changed then the place that did it forgot to reset it when it was in the shop, you could look in the owners manual it should tell you how to turn it off
You have a defective airbag. You replace that bag.
change the oil
With the key "off", push and hold the odometer reset button. With your other hand, turn the key to the "On" position. The odometer will count down dashes(-) and then display 000000. Let go of the odometer reset button. Turn key off and then on and start the engine. "Maint. Required" light should stay off
To reset the battery light on a 2008 Scion XB, first ensure that the battery and charging system are functioning properly. Disconnect the negative battery terminal and wait for about 15 minutes before reconnecting it. This should reset the battery light. If the light remains on, there may be an underlying issue with the battery or alternator that needs to be addressed.
It means there is some scheduled maintenance that needs to be done. Can be nothing more than an Oil/Filter change. Your owner's manual will tell you what needs to be done. You reset the light by holding the odometer reset button in while at the some time turning the ignition to the on position without starting the engine.