0
Turn the radio off and hold down the station tuning button for about 10-15 seconds. You should have some options come on on your radio's screen. Scroll through the options by pressing the seek button on the radio until you see (Oil Life) then press the station tuning button again it should say RESET. If it does press it again and it will say DONE.
What else can I help you with?
How do you reset the check engine light in a 2003 Chevy Monte Carlo?
unhook a battery cable for about 3 minutes and re-hook.
How do you reset Service Engine Soon light Monte Carlo 1996?
Take it to a mechanic, and have them erase the codes. Auto zone and advance will not do it as they are not mechanics
Rest check engine light on a 2000 monte carlo?
To reset the check engine light on a 2000 Monte Carlo, you can disconnect the negative battery cable for about 10-15 minutes, which will clear the engine codes and reset the light. Alternatively, you can use an OBD-II scanner to erase the trouble codes. However, if the underlying issue hasn't been resolved, the light may come back on. It's advisable to diagnose and fix any issues before resetting the light.
How do you reset the tire pressure light 2003 Monte Carlo?
To reset the tire pressure light on a 2003 Chevrolet Monte Carlo, first ensure that all tires are properly inflated to the recommended pressure. Next, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. Start the engine again, and the tire pressure light should be reset. If the light remains on, check for any underlying tire pressure issues or consult a mechanic.
How do you reset the service engine soon light on 2004 chevy Monte Carlo?
To reset the "Service Engine Soon" light on a 2004 Chevy Monte Carlo, you can use an OBD-II scanner to clear the trouble codes stored in the vehicle's computer. Alternatively, you can disconnect the battery for about 15 minutes, then reconnect it, which may also reset the light. However, it's important to address the underlying issue that triggered the light before resetting it to avoid future problems. Always consult your owner’s manual for specific instructions related to your vehicle.
How do you reset the security light on a 1999 Monte Carlo Z 34?
To reset the security light on a 1999 Monte Carlo Z34, you can try the following steps: Insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the security light turns off. After that, turn the key to the "Off" position for a few seconds, then start the engine. If the light persists, you may need to consult the owner's manual or seek assistance from a professional.
How do you reset oil life in 2006 Monte Carlo 3.6 liter?
To reset the oil life in a 2006 Monte Carlo with a 3.6-liter engine, turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal to the floor three times within five seconds. This should reset the oil life indicator. Finally, turn the ignition off and then start the engine to verify that the reset was successful.
How do you reset the check engine light on a 1986 Chevy Monte Carlo?
The easiest way is to simply unbolt the battery cable for a couple of minutes. However, if you haven't fixed the problem that set the check engine light it will simply come back on again.
How do you reset the ABS light on a 1998 Chevy Monte Carlo?
The light is on because there is a problem with the system. The light will remain on until the problem is fixed. Once the problem is fixed the light will reset itself after a short drive.
How do you reset security light on 1999 Monte Carlo?
To reset the security light on a 1999 Monte Carlo, insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the security light turns off. After that, turn the key to the "Off" position for a few seconds, then try starting the car. If the security light remains on or the car won't start, you may need to consult the owner's manual or a professional for further assistance.
How do you reset the change oil light on a 1997 Monte Carlo?
turn key halfway without starting the engine, press on the gas pedal slightly. this should work. keep tapping the gas slightly if it doesnt reset . do not press the gas pedal fully, you might flood the engine.
How do you reset the change engine oil light on a 2000 Monte Carlo?
Turn car on but don't start the engin. Pump breaks a couple times. Turn Key to off then start engin all the way. Light should be off.
