To reset the maintenance required light on a 1995 Mitsubishi truck, first turn the ignition key to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off and then back on to complete the reset. The maintenance light should now be turned off.
Read your owner's manual.
To reset the periodic maintenance required light on a 2011 Mitsubishi Montero Sport, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within ten seconds. After that, turn the ignition off, and the maintenance light should be reset. If it doesn't turn off, repeat the procedure.
maintenance with engine
To reset the periodic maintenance required light on a 2012 Mitsubishi Montero Sport, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within 10 seconds. The maintenance light should turn off, indicating that the reset was successful. If it doesn't, repeat the process or consult the owner's manual for further instructions.
The maintenance light,You will need to take it to a Dodge dealer to reset it. Or get a DBR-2 code scanner.BIG $$$
aperantly take the light out
The maintenance required light requires a scan tool to be reset.
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
To reset the maintenance required warning light on a 1989 Dodge Dakota, unhook the battery connector cables for 10 minutes. Reconnect them and start the vehicle.
With the engine and ignition off push and hold in the odometer reset button. While holding that button in, turn on the ignition but do not start the engine. After about 5 seconds the light will go off and the maintenance required light will have been reset.
To reset the maintenance required light in a 2007 Toyota, first, turn the ignition switch to the "OFF" position. Then, press and hold the trip meter reset button while turning the ignition to the "ON" position (do not start the engine). Continue holding the button until the maintenance light flashes and then turns off. Release the button, and the light should be reset.
How do you reset the maintenance light on a 2001 Honda accord ex I found some options at http://www.tegger.com/hondafaq/maintenance-reqd-light.html#why