0
The owner's manual as well as the Workshop Manual both state that three consecutive incorrect attempts at disabling the anti-theft system will render the radio inoperable and that it must be replaced. This is absolutely not true! There is a very simple procedure which will restore your radio to operability. It does not involve removing the radio and requires about 30 seconds to complete.
In the past we had chosen not to publish the code. However, this information was previously released on the net by folks who really didn't think security was important. We believe that poor security is worse than no security since it may lead to a false belief that things are secure when they're far from being so. As a result, we've decided to publish this controversial, yet widely known procedure.
For most 1990 - 1996½ factory radios:
To determine if this radio has been set with an antitheft user code, remove battery power from it for at least 45 seconds. When battery power is restored with no user code set, the radio's operation is immediately restored. If a code is set "cod e" flashes in the radio's display.
When "cod e" flashes in the radio's display after battery power is restored, and you know your antitheft user code, the radio's operation can be restored by following your Owner's Manual "If Antitheft system is Activated" procedure. If you don't know your antitheft user code, or to remove one previously set, follow the same procedure three times entering an invalid 1 to 4-digit user code each time. Once an invalid 1 to 4-digit user code is entered three times, "err" flashes in the radio's display. When flashing "err" displays, the radio is now set to accept the following re-set procedure.
Press the # 1 button
Press Stop/Eject
Press Am/Fm
Press Clock Button
-- -- -- -- Will appear.
Enter code 4 9 8 9
Press F/Forward & Reverse at the same time and hold for a couple seconds.
The code should now be removed. Follow the instructions in your manual to set a new code.
For 1996½ - 1997 (has number 1273 on it)
To determine if this radio has been set with an antitheft user code, remove battery power from it for at least 10 seconds. When battery power is restored with no user code set, the radio's operation is immediately restored. If a code is set "code" flashes in the radio's display.
When "code" flashes in the radio's display after battery power is restored, and you know your antitheft user code, the radio's operation can be restored by following your Owner's Manual "System activation" procedure. If you don't know your antitheft user code, or to remove one previously set, follow the same procedure three times entering an invalid 1 to 4-digit user code each time. Once an invalid 1 to 4-digit user code is entered three times, "err" flashes in the radio's display. When flashing "err" displays, the radio is now set to accept the following reset procedure.
Press Scan
Press AM/FM
Press Prog/Auto M.
Press FForward
This should give you the "- - - -"
Enter 4 9 8 9
Press Prog/Auto M. first, then press Scan (Hold both buttons down at the same time and make sure to follow this order. If you reverse the order it will not work.)
The display should now read "Good" The radio should now work again."
What else can I help you with?
How do you reset your radio Mazda 323 2003?
To reset the radio in a 2003 Mazda 323, turn on the vehicle and then press and hold the "Power" button for about 5 to 10 seconds until the display resets. If your radio is locked or displays a security code, you may need to enter the code provided in your owner's manual or contact a dealer for assistance. Additionally, you can disconnect the car battery for a few minutes to reset the radio if necessary. Always ensure you have any required codes before disconnecting the battery.
When chaning the battery on 2003 bmw325 xi do you have to reset the alternator?
No, but you will have to reset your clock and radio presets.
How do you reset after changing the battery in 2003 Chevrolet avalanche?
The only thing you will have to reset is the clock and the radio presets.
How do you reset the electrical after changing battery on 2003 highlander?
There is nothing to reset except the radio presets and the clock.
How do you reset your radio in your 2003 range rover?
To reset the radio in a 2003 Range Rover, first, ensure the vehicle is turned on but the engine is not running. Then, locate the radio unit and press and hold the "Power" button along with the "Menu" button for about 10 seconds until the system resets. If this doesn't work, you may also disconnect the vehicle's battery for a few minutes to reset the entire electrical system, including the radio. Always consult your owner's manual for specific instructions related to your model.
How do you reset the trip computer on a mazda 6 53 reg?
To reset the trip computer on a 2003 Mazda 6 (53 reg), locate the trip button on the dashboard or on the instrument cluster. Press and hold this button until the display resets to zero. If your model has a menu option, navigate through the settings using the button to find the trip reset feature. Release the button once the trip information has been reset.
2003 VW Beetle?
i have the code for the radio reset but i dont know how can you tell me
Which fuse resets the radio CD in the 2003 Honda Accord?
The radio fuse is used for the CD player on a 2003 Honda Accord. To reset the radio pulled the specified fuse out of the fuse box.
How do I reset radio in 2003 Honda Odyssey?
There is a 5 digit code in the glove box.
What is the mileage per gallon for Mazda protege 5 2003 model?
36
How much hoersepower does a 2003 Mazda 6 have?
The 1.8 petrol Model has 120bhp
How do you remove the radio from a 2003 Mazda tribute?
go to this page: http://www.mazdaforum.com/archive/threads/how-to-pull-radio-7215-1.html
