0
To set the dwell on a 326 Pontiac, you'll need a dwell meter. First, connect the dwell meter leads to the appropriate terminals on the ignition coil or distributor. Start the engine and let it warm up to operating temperature, then rev the engine slightly to stabilize it. Adjust the distributor's points gap until the dwell reading is within the specifications, typically around 30-34 degrees for a Pontiac V8.
What else can I help you with?
What is the ignition gap points dwell and plug gap for 1967 Pontiac 326 ho?
Dwell is 28-32 degrees and the plug gap is .035
How do you set the points on an old Pontiac distributor?
By dwell use a meter 28-32 degrees
What is the ignition gap points dwell for a 1973 Pontiac 400?
If you set the points at 30 degrees you will be fine.
What is the dwell reading for a 1967 Pontiac firebird 326 engine?
It's been a while since I've messed with point type distributors, but if I remember correctly it should be 28-32 degrees.
Where is the starter on a 1966 Pontiac 326 engine?
the starter on all Pontiac 326-455 engines are on the drivers side of the engine.
What is the firing order for a Pontiac 326?
18436572
Will a 350ci Pontiac intake fit a 326ci Pontiac?
If your 326 is a 65-67, yes.
How do you set dwell with out engine running?
My advice would be to set the points at .020" with a feeler gage to get the engine running, and then use a dwell meter to set the dwell after the engine is running.
Where is the timing mark on a Pontiac 326 v8 engine?
on the harmonic balancer.
Where should your timing mark be on a Pontiac 326?
It is located on the harmonic balancer.
What is the firing order for a 326 1964 Pontiac tempest distributor?
1,8,4,3,6,5,7,2.
How do you set the dwell on a 1974 350 Chevy truck?
attach a dwell meter and set the points for 30 degrees.
