There is usually two Allen key bolts on the brake that you need to take out before you can take the brake off.
On the rotor there are 6 Allen key bolts in the middle that you need to take out
first take off frontwheel then take off brake caliper then rotor will pull right off .
You usually have to take off the brake caliper, then the caliper mounting bracket to free the rotor.
The rotor will wobble when the caliper is removed if the rotor isn't seated. Older jeeps don't need to have the rotor seated so it will slide off when the caliper is removed.
There should be 2 screws on the front of the rotor, remove those and the rotor should come right off....you also have to take off the caliper bracket.
Remove the tire and wheel from your 1995 Chevy. Remove the brake assembly. Tap on the brake rotor with a mallet or hammer. The brake rotor will slide off.
Jack up the front of your 1991 Mitsubishi Eclipse. Remove the brake pad assembly. Loosen the brake rotor by tapping on it with a hammer or mallet. Slide the brake rotor off. Reverse the process to install the new brake rotor.
The front brake rotor, on a 2004 Chevrolet Colorado, can be removed by first removing the wheel. Next, remove the brakes. The rotor will slide off
Remove the wheel and tire assembly and the brake caliper then the brake rotor will slide right off.
Remove the tire and wheel from your 1995 Chevrolet K 3500. Remove the front brake assembly. Tap on the brake rotor with a hammer or mallet until it becomes loose. Slide the brake rotor off.
dodge caravan front brake rotors should come off after removing the brake caliper. first check for any hardware that may hold the rotor in place, then hit the rotor with a hammer, in between the wheel mounting studs. (not on the area where the brake pads make contact. this should knock the rotor loose. good luck.
To remove the front brake rotors on a Ford Freestar, start by loosening the lug nuts and safely lifting the vehicle with jack stands. Remove the wheel, then take off the caliper by unbolting it from the bracket, and slide it off the rotor. Next, remove the caliper bracket by unscrewing its bolts, and then you can pull the rotor off the hub. If the rotor is stuck, gently tap it with a hammer to dislodge it.
Remove wheel Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub