0
To tighten the drive belt on a Yamaha Viper, first, ensure the snowmobile is on a flat surface and safely supported. Locate the drive belt tension adjustment bolts, usually found on the primary clutch. Use a wrench to turn the adjustment bolts clockwise to increase tension. After adjusting, check the belt for proper tension by pressing down on the belt; it should only deflect slightly under pressure.
What else can I help you with?
How do you tighten a loose drive belt?
To tighten a loose drive belt, find the pully that is connected to the belt. Tighten the pully and then hold the belt in place using the adjuster belt. Check out the related video to see an example of how this is done.
How do you tighten a 1970 Johnson snowmobile drive belt?
The drive belt is fixed. There is no way to tighten it. They are model specific. You need to have the correct belt for the snowmobile. Now if you are referring to the track, that would be a different story. They are adjustable.
How do you reduce slip on belt drive?
tighten belt or replace it if it is glazed on contact surfaces
How do you loosen and or tighten the drive belt on a 1990 Ford Thunderbird?
You can't, the belt is called a serpentene belt, you have to replace the belt.
How do you change drive-belt on a John Deere T155?
how do you tighten belt on T155 john deere
How do you tighten the drive belt on Murray 14.5 hp riding lawnmower?
no
How do you tighten a loosen drive belt for a 1996 camaro rs?
loosen the alternator
Replace the AC drive belt on Geo Metro?
Begin by loosening the tensioner pulley. Take the old air conditioning drive belt on. Put the new air conditioning drive belt on and tighten the tensioner pulley.
Why does your 91 dodge spirit drive belt slip off when wet?
Tighten it or replace it.
How do you tighten a loose drive belt on 2002 altima Nissan?
I replaced an alternator on a 2002 Nissan Altima but the drive belt is now too loose even with it having an automatic belt tensioner
How do you tighten a Motion Drive Belt on a Murray Lawn Tractor?
You will have to make sure you park on a flat serface before tightening the motion drive belt of a murray lawn tractor. Remove most of the parts from underneath the tractor until you can reach the belt. Tighten of loosen screws as needed.
How do you adjust a new drive belt for a 1538 hydro Sabre lawn tractor?
Need to tighten the belt on john Deere 1538
