0
To turn off the spanner light on a Toyota Hiace, you typically need to reset the maintenance light using the vehicle's odometer. Turn the ignition key to the "ON" position without starting the engine, then press the trip meter button until the odometer displays "000000." Turn the ignition off, then back on, and the spanner light should be reset. If the light persists, it may indicate an actual maintenance issue that needs attention.
What else can I help you with?
What is the transit spanner light?
The spanner light is a service light
How do you get the spanner light off on Ford Falcon?
to get the spanner (or service me now) light off all you have to do is turn the ignition on while the engine is off and hold in the trip meter reset button for six seconds or so.
How do you reset the spanner light on a Renault Clio?
To reset the spanner light on a Renault Clio, first turn on the ignition without starting the engine. Then, press the accelerator pedal fully three times within five seconds. After this, turn off the ignition and start the engine to verify that the spanner light has been reset. If it remains on, the procedure may need to be repeated or there may be an underlying issue that requires attention.
Vauxhall astra dashboard car with a spanner light blinking engine not starting?
dose the car turn over or nothing at all when you turn the key
How do you reset the spanner symbol on the dash board of a 206 1.4hdi?
To reset the spanner symbol on the dashboard of a Peugeot 206 1.4 HDi, turn the ignition on without starting the engine. Press and hold the trip reset button on the dashboard, then turn the ignition off while continuing to hold the button. After a few seconds, turn the ignition back on, and the spanner light should reset. Release the button, and the warning light should now be gone.
Vauxhall astra 2.0 dti spanner light?
this means that's its due a service , if you press and hold the odometer (trip) button on your dash then turn ignition on you should get a countdown from 10 to 0 then the service light will be reset, and............... the spanner has gone!!!!!
How reset a spanner of a polo vivo?
To reset the spanner light on a Polo Vivo, first turn on the ignition without starting the engine. Press the gas pedal fully three times within 10 seconds. After that, turn off the ignition. The spanner light should reset, indicating that the service reminder has been cleared. If it doesn’t reset, consult your vehicle's manual or a professional mechanic for further assistance.
How do you turn off the service light on a 2002 transit van?
If you mean the orange light showing oil can and spanner hold both foot brake and throttle, turn on ignition and hold for 30 seconds. The light will flash, turn off ignition job done.
How do you turn off the service spanner on a berlingo?
To turn off the service spanner light on a Citroën Berlingo, you typically need to reset the service indicator through the vehicle's dashboard. Turn the ignition on without starting the engine, then press the trip reset button until the service spanner icon starts flashing. Finally, keep holding the button until the icon goes off, indicating that the reset is complete. If the light persists, consult the vehicle's manual or a professional for further assistance.
How do you get rid of service spanner light peugeot 206?
To reset the service spanner light on a Peugeot 206, you need to turn on the ignition without starting the engine. Press and hold the trip reset button on the dashboard, then turn the ignition off and back on while continuing to hold the button. After a few seconds, the light should reset and turn off. Release the button, and the service light should be gone. If it persists, consult your vehicle manual or a professional for further assistance.
What is a spanner light?
uh dictionary
How do you reset Service light SEAT Altea?
If the service light is in the shape if a spanner then I presume it is like the 2008 model. In which case press and hold the trip button "0.0" before inserting the key. Insert ignition key while holding down the trip button and turn on ignition without starting car. Release the trip button and the service light spanner will cease to flash. Now turn the trip button to the right (clockwise) and it will reset. Service light (spanner) should disappear and only return when the next service is due!
