0
Inflate the tires to the recommended pressure, this information is located on the driver side door jam when you open the door. Put the car in park. Turn the key to the on position. Hold down the tire pressure button (exclamation point (!) with tire tread under it) for 10 seconds then release. The indicator light will turn off.
The pressure can be set to any pressure you would like depending on altitude and temps but it is recommended you use the factory specs on the door.
I have a 2006 BMW 330xi. It does not have the iDrive Navigation system. To fix this problem make sure you have the correct pressure in all 4 tires, and your spare if you have one. Then on your control stick (on the left hand side) flick the switch up until you see the (!) icon. Hit the button on the end of the stick and an arrow will appear saying reset. Hit the button again, this time holding it in and then you'll see it say reset.
What else can I help you with?
How do you turn off BMW 128i tire pressure light?
To turn off the tire pressure light on a BMW 128i, first ensure that all tires are properly inflated to the recommended pressure. After adjusting the tire pressures, start the vehicle and press the "BC" button on the turn signal stalk until you see the tire pressure monitor menu. Select "Reset" or "Initialize" to recalibrate the system. If the light remains on, it may indicate a tire issue or a malfunction, and you should consult a professional.
What is the exclamation point warning light on a BMW 650I?
The exclamation point warning light on a BMW 650I indicates low tire pressure.
How do you reset flat tire light on 2006 330i BMW?
To reset the flat tire light on a 2006 BMW 330i, first ensure that all tires are properly inflated to the recommended pressure. Then, start the vehicle and locate the "SET" button, usually found on the dashboard or near the tire pressure monitoring system (TPMS) indicator. Press and hold the "SET" button until the tire pressure light blinks and then turns off. Finally, turn off the ignition and restart the car to confirm that the light is reset.
How do you reset low tire pressure light on a bmw 325i 2006?
depneding on model/yr, either thru console mounted button, or thru turn signal stalk
How do you turn off Flat Tire Monitor light on 2008 BMW 328i?
I will take it to the dealership or call them.
How do you reset tire pressure monitor BMW X5 2007?
To reset the tire pressure monitor on a 2007 BMW X5, first ensure that all tires are properly inflated to the recommended pressure. Then, turn on the ignition without starting the engine. Press the "Menu" button on the iDrive controller, navigate to "Vehicle Settings," select "Tire Pressure Monitor," and choose "Reset." Confirm the reset, and the system will recalibrate the tire pressure monitoring system.
How do you turn off BMW X3 tire pressure light mean?
there should be a row of buttons by the gearbox one of which has the tyre pressure symobol on, turn the key so that all symbols are lit but engine not yet started. press and hold the tyre button by gearbox, it should go amber and then eventually turn off
What does the low tire pressure light look like for BMW 3 series?
ich it it dosent haveone ich it it dosent haveone
What is tire pressure for BMW 530i?
Guessing and following advice from others is not the correct tire pressure. The correct tire pressure for your BMW is listed in the owners manual and on the drivers door post. That is the pressure recommended by BMW who designed your car and know what pressure is best.
What is the correct tire pressure for BMW X5?
32/2.2
What is tire pressure for BMW Z3?
25 - 30 psi
What is the hot tire pressure for a BMW Z3?
Try to measure the tire pressure on a cold(!) tire and it should be 2 bar for 16' and 17' standard tires.
