To turn off the engine management light on a Discovery TD4, first, you need to diagnose the underlying issue using an OBD-II scanner to read the fault codes. Address any necessary repairs based on the codes retrieved. After resolving the issue, you can reset the engine management light using the scanner or by disconnecting the battery for a few minutes. If the problem persists, it may indicate a more serious issue that requires professional attention.
You need a scan tool.
How do you turn off the electronic engine management systems light indicator on the dash
you need to put the vehicle on the computer for the problem and then take matters on.
It the engine management warning light is on it is best to find out what the problem is and fix it. Many auto parts stores have a reader and call tell what is wrong for free.
turn ignition to poss 2, then hold down button for trip meter for about 15 seconds.. start engine, engine management light should go off...
you can buy a code scanner and delete the code or replace the part(s) that are making it turn on.
To reset the service light on a Discovery 3 TDV6, first, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal fully three times within ten seconds. After that, turn the ignition off and then back on. The service light should now be reset.
You need to have the codes read by a codereader, then cleared by the reader after the fault is repaired.
There are sensors all over the engine that can turn the check engine light on.There are sensors all over the engine that can turn the check engine light on.
Yes a bad senser in any vehicle will turn your engine light on. Even a performance air intake will turn your engine light on.
How do you turn off the check engine light on a 2001 honda accord?
Get your engine checked