0
What else can I help you with?
What is an easy way to check the bulb for the brake light on a vehicle?
An easy way to check the bulb is by activating the turn signal. Most cars however have 3 bulbs in each tail light housing. one for brakes, one for reverse, and one for the turn signal. The most accurate way is to tap the brake pedal.
Brake lights do not work all the time replaced brake light switch?
If you have the same bulb for brake and signal, brake light power needs to be interrupted by the signal lights, The brake circuit has to go through the signal light switch so the problem could be there.
What is the color code for wiring my 1996 S10 blazer trailer hitch?
Vehicle side, Brown, running lights Yellow, left signal/brake light Green, right signal/brake light Black, ground Trailer side, white is ground
Why does the car's electrical turn on when the brake pedal is depressed and the car is not running?
It turns the rear brake lights on as a safety feature. The brake pedal is pushed in, causing the fluid to move forward in the brake cylinder,activating a brake light switch. Even if the vehicle is off, the lights will still come on.
Why does the Third brake light blink when turn signal is in use?
You probably have a turn signal bulb with two filaments one for the turn signal and one for the brake light. If the ground connection is bad on the turn signal circuit then the current would need to find another path to ground. The only other one available is through the brake light filament to the ground on the center brake light. Try removing the taillight assemblies from the vehicle look for what is probably a black wire screwed to the body or a circuit connection and either tighten the screws a bit or clean the connections.
What is wrong when your brake light flashes with your indicator when you apply brakes while indicating?
When your brake light flashes with your indicator, it typically indicates a wiring issue or a faulty ground connection in the vehicle’s lighting system. This can cause electrical interference between the brake and turn signal circuits, leading to the brake light responding simultaneously with the indicator. It may also suggest a blown fuse or a problem with the turn signal relay. It’s important to have this issue checked by a professional to ensure safe vehicle operation.
The driver side brake and signal light is not working on my 98 Chevy 1500?
most likely a bulb b/c if it was the fuse your other brake and signal light wouldn't work... most vehicles the brake and signal light are all in one bulb... try replacing the light bulb
Why do your tail lights work but not your brake lights?
They are two separate circuits, each has their own fuse. The brake lights not working could be caused by a few things such as a blown fuse, blown bulbs, bad brake light switch, misadjusted brake light switch and depending on what vehicle you have, a bad signal light switch.
What does it mean when the rear brake light does not work and the turn signal flashes fast?
Usually when ones turn signal is blinking fast its telling you that a turn signal bulb (and in some cases a brake light bulb) is out. If it blinks fast when you turn on the the left signal the burnt out bulb is on that side of the vehicle (could be front or rear bulb so you'll have to check). And vice versa
Where is the break light on Peugeot 207?
The brake light on a Peugeot 207 is typically located on the rear of the vehicle, integrated into the tail light assembly. When you press the brake pedal, the brake lights illuminate to signal to other drivers that you are slowing down or stopping. If you need to replace a brake light bulb, access is usually gained by removing the tail light housing from the rear of the car. Always refer to the vehicle's manual for specific instructions related to your model.
How do you replace the tail - turn or brake light bulbs on a Ford Explorer sport?
No vehicle year was given so I have to keep it general... Ford Explorer Sport turn signal / brake light bulb lamp replacement: Purchase the correct replacement turn signal / brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement turn signal / brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for turn signal / brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
What would cause both the turn signal and brake light fuses to blow on a 2001 Ford Escape?
short circuits in the turn signal and brake light circuits
