0
What else can I help you with?
Why does only one of your fog lights work?
one probably burned the bulb. those always go out.
Three light switches one room and one light bulb you can only go in it once what light switch turn the light bulb on it has something to do with the temperatur.?
turn 2 switches on wait one minute, turn one off go in the room if the bulb is off and warm it was the last one you turned off if its cold its the one you didnt touch and if its on its the only switch left on.
Why does one headlight go out when the bright lights are turned on?
One filament of bulb burned out (double filamented bulb) Replace bulb
Why does removing one bulb from a string of lights in a series circuit cause all the light to go out?
In a series circuit there is only one path through every component in the circuit. Breaking that path by removing a bulb will stop the current flow...all lights go out.
How do you remove the head lights from a 1995 ford explorer?
to change the bulb you go in from the backside, if its burned out you only need to replace the bulb. its similar to replacing a taillight bulb
What happens when you remove one bulb from a series circuit?
Answer: it will burn out **Explain:**The same current flows through each part of a series circuit. If the circuit is broken at any point there won't be any current that will flow. In this case, if one of the bulbs blew out, the other bulb would not be able to light up because the flow of electric current would have been interrupted. #Carryonlearning
Turn signal bulb stays on but does not flash?
If it's only one side it usually means that there is a burned out bulb somewhere.
If the filament of the bulb is broken would the circuit be complete?
If the bulb's filament is broken, the whole circuit becomes open. If the bulb is in a series circuit or is the only bulb, the electricity would no longer flow. If the bulb is in a parallel circuit, along with other bulbs, then only the blown bulb would go out, and the other bulbs would still work.
There is two rooms one has three light bulbs in it the other has three switches you are only allowed in the first room once you start in the secon how do you find out which switch operates which bulb?
You turn on two switches wait 5 min. and turn one of the switches off! go in the next room the cold one belongs to the switch you never turned on..the warm one the switch you only left on 5 min and the lite one to the switch that is turned on! you switch on one switch for a few minutes, one for ages, and dont turn the other one on at all. you go through to the other room, the bulb that is warm is operated by the first switch, the roasting hot bulb (that would burn your hand) is operated by the second switch, and the cold bulb is operated by the third switch.
When a headlight bulb burns out on a 1997 Ford Explorer does the check engine light go on?
No, the headlight bulb will just not turn on. The check engine light only comes on when there is a problem with the ENGINE, not the BULB.
How do you change headlight bulb in Lexus rx300?
you can go to a auto shop and buy a rx300 bulb and after you can get someone to remove the headlight and you can remove the bulb and put the new one.
Can you test a strobe light bulb?
the only way to test one is to put the bulb in the strobe housing and apply recommended power.
