0
depending on year make model the proportioning valve is usually mounted after the master cylinder some time to the fenderwell with a bracket and sometimes with long bolt the go through body of valve the are required to be connected withdot rated brake line with double flared ends on each connection the valves purpose is to regulate the fluid pressure that needs to have more pressure to go to front brake and knock down pressure to rear brakes like i said depending on the vehicle rhe front brakes normally receive 70% of the pressure and the rear only needs about 30% pressure the average car does 70% stopping on front and 30% in back being mosr carweight and stop inertia falls heavily on the front the valve also has a pressure loss valve will turn on red brake light ilettin you know you have a pressure loss on part of you system
What else can I help you with?
Where does the PCV valve hook up to on a 6 l engine?
where does your PVC valve hose hook up to from the valve cover on a 6 l motor
how do you drain the how tub?
There should be a drain valve where you can hook up a hose and then open the valve to drain.
What does the PCV valve hook up to?
It hooks up to the vacuum ports on the carb or intake.
Where does the egr valve hook up to?
The ERG valve is a valve in the turbo/supercharger system that controls boost pressures to the manifold. Normally it is hooked up to the computer system and the throttle body. Sometimes just the throttle body.
Where do you add freon to a 1995 Ford Escort?
There is a schrader valve on the low pressure line (larger a/c line). That's where you hook up the hose. Be sure to hook it up to the LOW PRESSURE SIDE, because if you hook it up to the high pressure side the can could EXPLODE.
Where does the hose from the black ball in the front fender on a 1989 firebird hook up?
it goes to your cruse controle valve
How can you stop a leak on the low side hook up on ac system?
You mean the schrader valve? That typically has to be replaced.
How do you hook up a propane tank?
To hook up a propane tank, first make sure the tank valve is closed. Then, connect the regulator to the tank valve and tighten it securely. Next, attach the hose to the regulator and the other end to the appliance you are using. Finally, open the tank valve slowly and check for any gas leaks using soapy water.
How do I properly hook up a propane tank?
To properly hook up a propane tank, first ensure the tank valve is closed. Then, connect the regulator to the tank valve and tighten securely. Next, connect the other end of the regulator to the gas line of the appliance you are using. Finally, open the tank valve slowly and check for any gas leaks using soapy water.
What is the bleeder valve for on the fuel line of a fuel injected car?
you hook up a fuel pressure guage to it to check the fuel pressure
How do you hook up a fake blow off valve on a 1997 Honda civic?
Stop being a ricer and give your grandma her car back. If you want a blow off valve. Have a shop professionally install a complete turbo set up.
How do you check the fuel pump on a 1993 dodge ram van?
Hook a fuel pressure gauge up to the shrader valve on the fuel rail.
