0
These are easy. They should be located in the front engine compartment by the radiator or by the wheel wells. They are black and look like a horn and usually have one or two bolts attaching it. There is a wire you have to unplug from the horn. This is a hot wire so protect it from touching the metal surfaces of the car or grounding the connector. Most cars have one or two. But they are generally somewhere in the front of the engine compartment.
What else can I help you with?
How do you replace Brakes on a 2003 Ford Explorer?
How hard and how do you replace the rear disc brakes on a 2003 Ford explorer? I have replaced a lot of brakes from 60s and 70s to the newest replacements of 91 Ford explorers and 91 Ford f-250s front rotors.
How do you replace the rear driver power window on a 1998 Ford Taurus?
You need to drill out the rivets and have a rivet tool to install a new window not to hard to do if you got the proper tools
Ford Expedition 2003 steering wheel hard to turn?
2003 ford expodition steering wheel is hard to turn.
How hard is it to replace a fuel pump n a 1970 Ford Torino?
It is not that hard to replace a fuel pump in the 1970 Ford Torino.
How hard is it to replace the speakers on a 2004 Ford Explorer?
it is hard to replace the speaker because the ford explorer needs accessories manufactured by the same manufacturer
What if you do not have the old key to turn to the on position for installing the new ignition in a 94 Ford Taurus?
My ford truck key fits and starts my taurus! But that might be because the switch is worn, but you might want to try a couple different ford keys before tearing off the steering column. there were answers for hard way also, here is one way that might work although it doesnt sound very easy to me: http://www.ford-forums.com/ford-taurus/4345-how-replace-ignition-switch.html
What is your opinion of the airbag module Ford Taurus?
It is a must-have. The airbag comes to the owner's rescue when he hits a hard surface or has a hard impact.
Is it hard to replace a 96 ford contour carburetor?
If it had a carburetor , it wouldn't be hard to replace - it's fuel injected
Is it hard to replace a oil pan gasket on a 2003 Ford Taurus?
It is not hard, certainly no more than any large gasket. I have most success by 'gasket gooing' the gasket to pan, then holding pan up and inserting all bolts 2-3 turns first, then start doing up finger tight opposite sides, finally with wrench, still opposite sides.
Ford Taurus 96 shifts into second gear very hard other than that the tranny work very good?
i had that problem on my 92 merc sable wich is the same transmission as the taurus. they had to replace the gears inside the tranny with new ones if you are able to do that your self i suggest you do so as Ford and most mechanics are very expensive it cost me 1,250.00 bucks to do this
How do you replace the fuel filter located on a 2003 Ford Ranger 2wd 2.9L?
Get special tools from the parts store and there should be directions on how to use them. It isn"t hard or expensive.
How do you replace the plug wires in the correct spot on a 1991 Ford Taurus Sho?
This is a hard one to answer without a diagram. Please see the related links area for a diagram of the firing order and plug wire routing. You could also replace one wire at a time to avoid the problem.
