32:1 to 36:1 but you shouldn't have to mix it. The PW80 comes with a Autolube oil injection system eliminates the need to premix fuel and oil.
u can do 40 with a pw80
how to set Yamaha pw80 carburetor
If your Yamaha PW80 won't start after the engine is warm, it could be due to several reasons. One common issue is a faulty spark plug that may be failing when hot, leading to poor ignition. Another possibility is a vapor lock in the fuel system, which can occur if the fuel line or carburetor gets too hot. Lastly, an overheating engine could cause increased clearances in the components, leading to difficulty in starting.
yes they are all the same
well a pw80 goes 74kph and a kx65 goes 110kph
The AM2 fuse controls the starting system as well as the fuel injection system. This fuse is also connected to the discharge warning system and the airbags.
Yes, you indeed can get your fuel tank connected to a portacabin. The fuel tank can be connected to a portacabin on your construction site, which means you can connect it for heating.
It all depends on condition, if its a nice clean pw80 about 800-1200. hope this helped
All Yamaha PW80 s have 3 semi automatic gears ( no clutch lever etc )
According to the 49 CFR (Federal Rules regarding DOT Hazmat regs) the reportable quantity of diesel fuel is anything over 1001 lbs that is not directly connected to the fuel system of a vehicle. Do not count any fuel that you have in the fuel system of your vehicle, only what you are transporting. Hope this helps.
They are pretty simple, wiring wise. Here is a diagram from a 2001. http://www.weeksmotorcycle.com/pw80-wiring-diagrams.html