answersLogoWhite

0

What else can I help you with?

Related Questions

How is a battery leakage test conducted?

Set your voltmeter to a low DC Volt range. Connect the negative lead to the battery's negative post. Then move the meter's positive lead across the top and sides of the battery case. If some voltage is read on the meter, current is leaking out of the battery. The battery should be cleaned and then rechecked, If voltage is again measured, the battery should be REPLACED; the case is porous or cracked! BE CAREFUL BATTERY'S CONTAIN HARMFUL GASES, FUMES, & ACID! WEAR GLOVES AND BE SMART ABOUT THIS! IF YOU DO NOT KNOW WHAT YOUR DOING PLEASE BRING TO A PROFESSIONAL MECHANIC or SOMEONE WHO KNOWS WHAT THERE DOING! Any questions on auto mechanics email Rdyoungiii@yahoo.co.uk and ill be glad to answer your questions


What is leakage problem in battery?

1. Electrolyte leakage by corrosion of package, not good packing 2. Electricity leakage by electronic conduction through separators, intended for preventing such leakage and permit only battery outside conduction caused by protrusions that wound the separators which are very thin


What is pressure test for transformmer and how to test?

On installed transformer a test is performed to check weather it has any oil leakage or not, the test is called pressure test, more precisely pressure leakage test.


Have you conducted a test for iron in the water?

Yes, we have conducted a test for iron in the water.


What pulls power from a battery?

Any load connected to the battery like lights, fans etc. Apart from this there is leakage to the atmosphere and the environment. Though small this leakage over a long time will make a battery dead


Can you find out if your pistons hit your valves when the timing belt snaps or do you have to put new timing belt on first?

You can do a cylinder leakage test to check for bent valves.You can do a cylinder leakage test to check for bent valves.


Which country conducted the nuclear test?

Which test and when?


Why should you pull a vacuum?

To test for leakage in the system.


How do you test leakage on equipment?

by measuring the insulation resistance then by usig the formula for finding leakage current leakage current =voltage applied /resistance measured by megger.


What is a battery test?

a test battery is what you need to work out your capasity analysis after.


What test can be conducted to determine the acidity or alkalinity of a substance?

A pH test can be conducted to determine the acidity or alkalinity of a substance.


How is battery leakage test conducted?

Set your voltmeter to a low DC Volt range. Connect the negative lead to the battery's negative post. Then move the meter's positive lead across the top and sides of the battery case. If some voltage is read on the meter, current is leaking out of the battery. The battery should be cleaned and then rechecked, If voltage is again measured, the battery should be REPLACED; the case is porous or cracked! BE CAREFUL BATTERY'S CONTAIN HARMFUL GASES, FUMES, & ACID! WEAR GLOVES AND BE SMART ABOUT THIS! IF YOU DO NOT KNOW WHAT YOUR DOING PLEASE BRING TO A PROFESSIONAL MECHANIC or SOMEONE WHO KNOWS WHAT THERE DOING! Any questions on auto mechanics email Rdyoungiii@Yahoo.co.uk and ill be glad to answer your questions