answersLogoWhite

0

Front strut coil springs typically take a few days to a few weeks to settle after installation. The settling process can vary depending on factors such as the spring material, vehicle weight, and driving conditions. Initially, there may be slight changes in ride height as the springs compress under load. It's advisable to allow some time before making any adjustments to the vehicle's alignment or ride height.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

How do you change the front coil springs on a Honda accord?

Use a strut spring compressor to compress the old spring, the remove the strut from the spring. Use the compressor to put the strut into the new spring. Install the strut and spring into the vehicle.


How do you change the front coil spring on a citroen xsara Picasso?

To change the front coil spring on a Citroën Xsara Picasso, first, safely lift the vehicle and remove the front wheel. Next, detach the shock absorber from the strut and remove any components that may hinder access to the coil spring, such as the anti-roll bar link and the upper strut mount. Use a coil spring compressor to safely compress the spring, then remove it from the strut assembly. Once the new spring is in place, reassemble the strut and components in reverse order, ensuring everything is securely tightened before lowering the vehicle.


How do you change front coil springs on 2004 Renault clio?

To change the front coil springs on a 2004 Renault Clio, start by safely lifting the vehicle and securing it on jack stands. Remove the front wheel, then disconnect the shock absorber from the strut assembly, and detach the strut from the lower control arm. Use a spring compressor to safely compress the coil spring, remove the top mount, and take out the old spring. Replace it with the new coil spring, reassemble the strut, and reinstall it back on the vehicle.


How do you replace front coil spring ford escort 98?

To replace the strut you have to jack up the car on the side you want to do and take off the wheel. Then, take it loose from the strut tower on the top. There are 3 or 4 nuts. Then take it loose from the steering knuckle on the bottom. The whole strut assembly lifts out. To replace the coil you have to have a strut compressor. It compresses the coil spring so the top of the strut can come off. Once the top of the strut is exposed the coil can be taken off the strut.


What is the difference between a shock and a strut in a car?

A strut is a combination of a shock absorber and a coil spring


What does a strut look like?

A strut looks like a shock absorber inside a coil spring.


What is the difference between top and bottom of front coil spring?

They're usually sightly differently shaped to attach well to the strut and the chassis.


How do you replace strut and coil spring on Nissan 300zx?

replace coil springs in a nissan 300zx


How do you replace the rear shocks on a 02 Nissan altmia?

1. Remove or disconnect the following:Rear wheels from the vehicle and support the rear axle with a jackStrut lower mounting through-boltsNote: Be sure to note the position the strut upper plate to the vehicle for reinstallation purposes.2 nuts from the top of the strutStrut as an assemblyNote: Do not remove the center locknut from the strut assembly until the strut is safely compressed.2. Compress the strut coil spring with a spring compressor.Strut assembly center locknutNote: Before removing the strut from the coil spring, note the positioning of the strut in relationship to the coil spring for reassembly.Strut leaving the coil spring compressedNote: Mark the coil spring position to the strut assembly for reinstallation purposes.3. To remove the spring from the strut assembly, perform the following steps:Compress the coil spring with the proper compressor tool.Remove the center retaining nut holding strut mounting insulator.Slowly decompress the coil spring.Remove the strut mounting insulator.Remove coil spring.To install:1. Install or connect the following:Coil spring onto the strut assembly. Be sure to align the matchmarks made during the removal procedure.Strut mounting insulator and compress the coil spring assemblyNote: It will be necessary to use a new locknut for the center retaining nut of the coil spring.Center retaining nut and torque to 43-58 ft. lbs. (59-78 Nm). Be sure the spring is seated properly on the strut and in the mounting insulator.2. Slowly remove the spring compressor tool.Strut assembly and torque the upper nuts to 31-40 ft. lbs. (42-54 Nm)Lower strut through-bolt and torque to 123-137 ft. lbs. (167-186 Nm)Note: Be sure to hold the through-bolt and tighten the nuts.3. Install the wheels, lower the vehicle and perform a front end alignment.


If a spring breaks on a strut can you only replace the spring on a Ford Windstar?

Yes. It is possible to purchase just the coil. Entire strut / coil assemblies can also be purchased for a very simple unit assembly as well.


Is it necessary to compress spring coil to replace rear strut?

Normally, yes.


What are all the parts to change the struts on Toyota Avalon 1998?

Strut mount, coil spring, coil spring isolator, rubber dust boot.