I have a similar problem. My air condition compressor was whinning, maybe a bad bearing. I don't even use the air anyway, and do not want to pay to fix it or remove it and put in these brackets that they sell. So I thought why not just buy a belt for this engine with out air and just by pass the air compressor. It just makes sense. The air compressor is just an add on bracket anyway. So buy a belt for your 1999 2.4 liter with out air and install the new belt. Bart
Not if you have a serpentine drive belt............
A serpentine belt pattern, for your 1999 Acura, can be obtained from most auto-parts stores. When you purchase. The serpentine belt. Ask for a diagram.
A/C Condenser is on the serpentine route.
The serpentine should route the same as with the AC except fro the AC compressor. The belt will go straight past the compressor, so you will need a shorter belt to make the bypass work.
i need diagrama for serpentine belt for 2000 aurora
I know on my cavalier which is a 2001 it is possible to re route the serpentine belt away from the air conditioner compressor. I was having trouble with mine popping the belt off. Hope I helped you out.
( Yes ) the 1999 Ford Explorer has a serpentine belt It is used to " drive " the accessories Power steering pump , alternator , etcetera
The 1999 Chevrolet Silverado serpentine belt assembly diagram can be obtained from most Chevrolet dealerships. The diagram is usually provided when you purchase the serpentine belt.
how to install serpentine belt on a 2009 dodge journey 3.5 liter v6
You can tighten the serpentine belt on your 2005 Chrysler 300 by tightening the tensioner pulley. Push the tensioner pulley to the right until the serpentine belt is tight.
Done automatically by belt tensioner
It is located right under the alternator.