answersLogoWhite

0

depends how strong and how many amps are still in battery and the each radio is different

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What kind of energy is a battery-powered radio?

A battery-powered radio operates on electrical energy stored in a chemical form within the battery. When the battery is connected to the radio, a chemical reaction releases stored energy in the form of electrical current to power the radio's components.


Radio doesn't work unless headlight switch is turned on?

The radio was wired wrong. Sounds like the hot wire for the radio was connected to the hot wire for the headlight switch.


I have a 96 mercury mystique I try to start my car and nothing but I have light and radio work battery and starter is good what could be the problem?

Ignition switch may be defective.


What do you reset after changing out a battery on a 2002 Cadillac Seville?

There is nothing to reset except the radio station presets and possibly radio code if the radio has a theft deterrent feature. Nothing else for you to do.


What would cas the radio stay on after key is out?

Being connected to the wrong side of the key switch.


Is there something to reset on 1999 plymouth breeze after replacing battery?

Nothing except the radio presets and the radio if it has theft deterrent.


Your 98 passat wont start you turn the key radio and lights everything is fine but nothing happenstheres no turning jus makes a faint sound What could be the problem?

Some possibilities, could still be the battery, battery connections, starter, starter connections, ignition switch, starter relay and neutral safety switch.


How do you reset impala after battery change?

There is nothing to reset except the radio presets and the clock.


How do you reset the battery on BMW 325?

Nothing to reset except radio presets and clock.


Is your battery going bad if as you are starting the car the radio changes station?

No. Something in your radio either isn't connected properly, or isn't functioning properly.


How do you get the antenna to go up with a new stereo installed if the antenna wire is connected to the stereo but the antenna won't raise now even from the switch?

The motor that raises and lowers the antenna is controlled by a wire which is connected to the power switch in the stock radio. The wire from the antenna itself has nothing to do with raising and lowering the antenna. Touch the wires that were connected to the stock radio to a hot wire and see if the antenna starts to move. If if does, hook that wire to the wire from the new radio which is supposed to control the antenna motor. If there is no such wire, connect the antenna motor wire to the Accessory circut. The antenna will go up whenever the key is turned on. Or, you can get fancy and install a switch for it.


Is there a electrical reset switch?

the clock/radio fuse resets the ecu which controls mostly everythingAnswerUnhook the battery.