Fork oil level 105mm is standard (or 19.4 oz or 572 cc)
I am fairly sure the fork style changed... I would not take the chance if possible
750cc's on a ratio cup.
510ml for each fork
How much fluid in the front forks of a 1985 atc 250r take. I am changing the fork seals
352cc of 10wt fork oiul
what is the capacity or how much fork oil does a vz800 take ?
The 1990 Yamaha YZ250 typically requires around 10.5 to 12 ounces (approximately 310 to 355 milliliters) of fork oil per leg, depending on the specific setup and desired performance. It's important to use the correct viscosity oil, usually 10W or 15W, based on your riding style and conditions. Always refer to the owner's manual for precise specifications and recommendations.
12.75 .oz #10 fork oil 6psi pressure
Each leg takes a 13.1 oz of 10 weight.Alter oil weight selection between 5 and 15 and compressed fill height between 140 mm and 220 mm to adjust damping and bottoming resistance for your needs.The stock spring rate is 0.325 Kg/mm.
well if you were to take the carb the exhaust the rad hoses and everything else connected to the engine you are looking at around 76 pounds
413ml each side
43 litres