750cc's on a ratio cup.
Fork oil level 105mm is standard (or 19.4 oz or 572 cc)
I am fairly sure the fork style changed... I would not take the chance if possible
well if you were to take the carb the exhaust the rad hoses and everything else connected to the engine you are looking at around 76 pounds
yes
No. It is done in vehicle.
The sensor is located under the timing belt behind the underdrive pulley. You will pretty much have to take that whole side of the motor apart to get to it....
The 2001 Elantra take 4.5 qts with filter change
To replace a blower motor on the resistor first you take off the nozzle and then you go into the motor through the nozzle and unlock it then repeat and oil and done.
9.5l
Do u need to take the pulls off to change the water pump on a 2001 concordeLXI 3.2 motor
just above the starter on the front of the motor. will have to take the starter off to get to it.
you take some out.