how do i replace the front strut on 1999 Saab 9-3
Take the strut from the left and use this
there is a fatty that comes and does it
most likely it is a cv joint going bad, but it can also be a strut tower, or a tie rod... front right strut
i have a 2001 BMW 540i and i would ;like to replace the front left strut my self. how would i go about it step by step?
To replace the front strut mounts on a new Corsa, begin by safely lifting the vehicle and removing the front wheels. Next, detach the strut assembly by loosening the bolts securing it to the steering knuckle and the top mount under the hood. Replace the old strut mounts with new ones, reassemble the strut assembly, and ensure all bolts are tightened to the manufacturer's specifications. Finally, reattach the wheels and lower the vehicle.
Yes, most definitely. You must always replace struts and shocks in pairs. Replace one front shock or strut then you must replace both. Same for the rear.
To replace the front struts on a 1995 Toyota Tercel, first, safely lift and support the vehicle and remove the front wheels. Then, detach the strut assembly from the steering knuckle and the upper strut mount by removing the necessary bolts. After that, replace the old strut with the new one, reattach it to the steering knuckle and the upper mount, and finally, reassemble everything by putting the wheels back on and lowering the vehicle. Always ensure to check the alignment after strut replacement.
To replace the front struts on a 2000 model Hyundai Sonata, you will first need to remove the tires. There will be 3 nuts on top of the strut mount. You will need to remove the 2 bolts that connect from the strut to the knuckle. Then you will need to remove the ABS sending unit as well as the front brake hose. Once these components are removed, you can remove the strut. In order to remove the strut, you will need a special tool to compress the spring. Once the struts are removed, you can safely replace them with new struts.
To replace the strut you have to jack up the car on the side you want to do and take off the wheel. Then, take it loose from the strut tower on the top. There are 3 or 4 nuts. Then take it loose from the steering knuckle on the bottom. The whole strut assembly lifts out. To replace the coil you have to have a strut compressor. It compresses the coil spring so the top of the strut can come off. Once the top of the strut is exposed the coil can be taken off the strut.
The cost to replace a front strut rod bushing on a 1998 Nissan Maxima is between $50 and $150, for a person who does it on their own. The cost varies based on the part brand or kit bought.
To replace the front strut bushing on a 1999 Plymouth Breeze, first, lift the vehicle and remove the front wheels. Next, detach the strut assembly by unbolting the strut from the knuckle and any top mounting bolts in the engine bay. Once removed, you can press out the old bushing using a suitable tool and install the new bushing, ensuring it is properly seated. Finally, reassemble the strut, reinstall it in the vehicle, and torque all bolts to the manufacturer's specifications.