answersLogoWhite

0

Didn't give make/vehcile, but parts range from $100 for a summit th350/th400 stock replacement to $1,400 for a racing billet unit. Labor varies also, a rwd truck is easier than a fwd car, $400-$1,500.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Where is the torque converter on a 1996 dodge ram 1500 5.9?

The torque converter is between the engine and transmission


Can a torque converter affect the success of rebuilding the transmission on a 1996 Chevy Blazer?

Yes. If you are going to remove the transmission to rebuild it, you may as well go ahead and replace the torque converter.. not to mention all the seals anywhere near that area.


How do you install a torque converter in a 1996 GM 3500 one ton truck?

You will have to remove the transmission and then pull the converter out of the trans.


Where is the torque converter solenoid on a 1996 Dodge Ram?

It is inside the transmission, on the valve body.


How do you get the torque converter on a 1996 sts to slide the last inch or so onto the pump shaft?

You have to turn the torque converter back and forth while pushing in on it. The last thing to engage is the front pump drive lugs. This has to be done before installing the transmission in the car (or bolting it to the engine block) -- the transmission and torque converter are installed as one single assembly after the torque converter is installed into the transmission.


How do you get to torque converter bolts Chevy s10 1996?

You need to remove the lower transmission inspection cover.


What is Code p0420 for a 1996 cirrus 2.5 v6 and how to fix it?

Catalytic converter failure. Replace the catalytic converter.


How can you put transmission oil back into the torque converter of a 1996 Geo Tracker after replacing engine?

Everything is back together and ready to run I assume. Just fill the transmission and fluid will be pumped into the torque converter as it runs.


Where is the torque converter for a 1996 4X4 Silverado?

It is between the transmission and the engine, You must either remove the engine are the transmission to get to it.


What is the transmission fluid capacity of a 1996 dodge grand caravan with a 3.3 engine?

9.1 quarts including the torque converter


How do you remove the torque converter bolts on a 1996 Chevy blazer?

Remove the starter and remove the protector places behind the started


How many quarts are in a 1996 Ford Taurus transmission?

In the pan about 4 quarts, 4-5 more in the torque converter.