A 350 Turbo transmission typically requires about 11 quarts of fluid for a complete fill, including the torque converter. However, when performing a fluid change or filter replacement, you may only need around 5 to 7 quarts. It's always advisable to check the owner's manual or service guide for the specific vehicle to ensure accurate fluid specifications.
regular unleaded
Take the trans out, the clutch is inside the trans ^_^
a little less then 3 quarts
The brake system uses brake fluid and the trans uses trans fluid.
If empty the automatic will hold almost 9 quarts.
4.5 qts with filter 7.2 pints dexron
AUTO TRANS: 2WD: 2.9 quarts - 4WD: 3.1 quarts. MANUAL TRANS: 1.9 quarts
All you can do in your driveway is drop the trans pan, replace the trans filter, replace the trans pan gasket, install pan (no gasket sealer needed or required!) and refill what fluid drained out in the process which is aprox half of the fluid the trans holds. Take it to a trans shop if you want a complete fluid change. They will have the equipment to do a trans flush.
The trans fluid will take on a pink, milky look.
Auto trans fluid.
drain the transmission fluid in the trany. than take the pan on the bottom of the trans off and the filter will be right there drain the transmission fluid in the trany. than take the pan on the bottom of the trans off and the filter will be right there drain the transmission fluid in the trany. than take the pan on the bottom of the trans off and the filter will be right there
it doent take transmission fluid unless your tranny has gears if it is just equipped with a cedntrifugal clutch no transmission fluid is needed.