You will first need to fill the fork completely with fork oil. Fork should be collapsed with the fork spring removed. Bleed the air out of the inner cartridge by slowly cycling the damper rod through it's full stroke. From this point you can set the oil level to the correct height measured from the top of the outer fork tube. Factory specs are:
Minimum Height: 155mm
Standard Height: 139mm
Maximum Height: 117mm
5o ml each leg fork.
what is the fork level height for a 1995 CR 125 honda
210ml per leg
No, it wont.
From my under standing if your riding MOTO, with a fork oil level gauge you measure put 110 mm.
70-75ml ATF
70-75ml ATF
The Honda CG 125 typically requires about 150 milliliters of fork oil per fork. However, it's important to check the specific model year and consult the owner's manual for exact specifications, as there may be slight variations. Always ensure you're using the recommended type of fork oil for optimal performance.
Well, when it comes to adding front fork oil to your Honda CRM 125, it's important to follow the manufacturer's recommendations. You can usually find the specific amount in the owner's manual or by contacting a Honda dealership. Remember, taking care of your bike is like painting a happy little tree - it's all about patience and attention to detail.
32-1
174cc per leg
120mm from the top