You will first need to fill the fork completely with fork oil. Fork should be collapsed with the fork spring removed. Bleed the air out of the inner cartridge by slowly cycling the damper rod through it's full stroke. From this point you can set the oil level to the correct height measured from the top of the outer fork tube. Factory specs are: Minimum Height: 155mm Standard Height: 139mm Maximum Height: 117mm
From my under standing if your riding MOTO, with a fork oil level gauge you measure put 110 mm.
No, it wont.
5o ml each leg fork.
70-75ml ATF
70-75ml ATF
120mm from the top
The Honda CG 125 typically requires about 150 milliliters of fork oil per fork. However, it's important to check the specific model year and consult the owner's manual for exact specifications, as there may be slight variations. Always ensure you're using the recommended type of fork oil for optimal performance.
The front forks must be removed from bike to check or change the oil. Clymer m457-2 1997 104mm standard ,min 81mm, max 120mm
Well, when it comes to adding front fork oil to your Honda CRM 125, it's important to follow the manufacturer's recommendations. You can usually find the specific amount in the owner's manual or by contacting a Honda dealership. Remember, taking care of your bike is like painting a happy little tree - it's all about patience and attention to detail.
The 2001 Honda CR125 typically requires about 10.6 ounces (or 315 milliliters) of fork oil per leg. It's important to use the recommended viscosity, which is usually 10W for most riding conditions. Always check your owner's manual for specific details and verify the oil level after filling, as it may vary slightly based on modifications or personal preferences.
There are various levels for the 1979 RM125N Air Fork Oil Capacity Standard 392mm - approx 13.2 US Ounces Low Level 376mm High Level 424mm