answersLogoWhite

0

Usually none at all.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

Gas oil mixture for 7.5 mercury?

It depends if it is a 2 stroke or a 4 stroke. A 2 stroke engine, you mix the gas and oil. A 4 stroke engine, there are separate tanks for the oil and gas.


What is the recommended oil to use for mixing with gas in a two-stroke engine?

The recommended oil to use for mixing with gas in a two-stroke engine is two-stroke engine oil.


Oil in muffler on lawn mower?

If it is a 2-stroke engine, the oil/gas mixture has too much oil. If it is a 4-stroke engine, the oil sump is overfull.


How do you you determine if a natural gas engine is 2 stroke or 4 stroke?

All natural gas engines are 4 stroke. In a 2 stroke engine the oil is mixed with the gasoline. This is not possible when using natural gas as a fuel.


How do you tell if an outboard motor is 2 stroke with direct injection or a 4 stroke?

With a 2 stroke engine, you mix the oil with the gas. With a 4 stroke engine, there are separate tanks for the oil, and the gas.


How do you tell if a lawn mower is a gas only or a gas oil engine?

A gas only engine has a spout where oil is added to the engine. If there is no spout, then it is a gas/oil engine. FYI - gas only engine is a four-stroke (four-cycle) engine and the gas/oil engine is two-stroke (two-cycle).


Do you add oil to the gas on a 4 hp Briggs and stratton?

No you do not put oil in the gas - 4 hp Briggs & Stratton motors are 4 stroke, not 2 stroke in which you do have to add oil to the gas.


If i have 4.5 liters of gas how much oil do i add?

The amount of oil you should add to 4.5 liters of gas depends on the specific oil-to-gas ratio recommended for your engine. Common ratios for two-stroke engines are 50:1 or 40:1. For a 50:1 ratio, you would add 90 mL of oil, while for a 40:1 ratio, you would add 112.5 mL of oil. Always refer to your engine's manual for the correct ratio.


How do you change oil in a two stroke engine?

There is no oil to change in a two stroke engine. The lubricant is the oil that is mixed with the gas.


Do you add oil to the gas of your Sears snowblower?

That would depend on whether the engine is 2-stroke or 4-stroke (aka 2-cycle & 4-cycle). If the engine does not have an oil filler tube, it is a 2-stroke and oil must be added to the fuel. If it has an oil filler tube, it is a 4-stroke and oil is added through the filler tube.


Can Mixed 2 Stroke gas Work in 4 Stroke Engine?

Yes it will work, but not well. If there is not too much of it,it will just burn blacker exhaust and foul up your plugs.


Do you mix oil and gas in a four stroke engine?

Usually no.