answersLogoWhite

0

a pro turbo engine built correctly with a high cfm turbo will generate well over 4 bar of boost or 56 psi even more wit high rpm motor with nitrous

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How much hp does a wastegate turbocharger give typically?

This isn't a very well phrased question as you could mean how much horsepower does adding a turbocharger produce, or you could mean how much horsepower do you get from replacing a factory wastegate on a turbocharger with an aftermarket one. However, neither of those questions can be answered concisely without specifics of the application.


What can be used to check for leaks on the pressure side of a turbocharger system?

Soapy Water


What component regulates the pressure in a turbocharger?

Pressure in a turbocharger is regulated by various components such as exhaust gas pressure,condition of blower and impeller blades,condition of gas passage on suction and exhaust side,condition of air filters,closing and opening timings of exhaust and inlet valves.


How much horsepower can a turbine creates in turbocharger?

The horsepower produced by a turbine in a turbocharger varies based on the engine size and design, as well as the specific turbocharger used. Generally, a turbocharger can increase an engine's horsepower by 30% to 50% or more, depending on the application and tuning. For example, a small turbocharger may add around 50 to 100 horsepower to a typical gasoline engine, while larger turbo systems can provide significantly more for performance or racing applications. Ultimately, the exact output will depend on factors like boost pressure, engine efficiency, and tuning.


How much pressure does a boat through hull pickup produce?

A will


Which component when open allows engine exhaust to bypass the turbocharger turbine reducing intake pressure.?

wastegate


What is error code P2262?

Trouble code P2262 means: Turbocharger (TC) boost pressure not detected


What is the difference between a pulse system and a constant pressure turbocharger?

Types of turbochargers Turbochargers are of two types and they are pulse and constant pressure type turbocharger. Pulse type turbocharger: In pulse type turbocharger, the exhaust gas directly enters the turbine side and drives the turbine with the exhaust gas energy. The connection from the exhaust side of an engine is directly connected to the turbine side of a turbo charger. The pipe connections from the exhaust gas towards the turbine side are generally small in length and exhaust grouping is provided to prevent the blowback of gases from one cylinder to another. Constant pressure type turbocharger: In constant pressure type turbocharger, the exhaust gases gets collected in a single exhaust gas reservoir, where the pressure is maintained constant so as to avoid any fluctuation in the exhaust gas energy pressure. The exhaust gas is introduced to the turbine side after maintaining the pressure inside the cylinder. Materials: Turbine and compressor blades: Steel or nickel alloy. Volute casing: cast iron Bearings: steel or gun metal.


What is a blow off valve and how does it work?

The blow-off valve should not be confused with a waste-gate. The waste-gate is a device that by-passes the turbine wheel of the turbocharger, limiting the shaft-speed of the turbocharger. Therefore, limiting the boost (pressure) that the compressor generates and keeping the turbocharger from over-speeding. A blow-off valve is mounted in the intake plumbing between the turbocharger compressor and the throttle plate. The blow-off valve is a second safety measure against the turbocharger over-boosting and damaging the engine. The blow-off valve is more commonly used to keep the turbocharger spinning when the throttle plate is suddenly closed. When the turbocharger is generating maximum boost pressure at full throttle and then the throttle is suddenly closed, compressed air coming from the compressor slams against the throttle, generating extremely high pressures that travel backwards to the compressor stopping the compressor from spinning. When the throttle plate is again opened, the engine must spool the turbocharger shaft again. The effects of this high pressure can also be very damaging to the turbocharger.


No boost pressure on TURBOCHARGER?

boost pressure, as you call it, will not show on gauge,if you have one, while engine is at idle the turbo pressure does not boost but runs all the time according to the revs of engine


How much does a turbocharger usually cost?

A motorcycle turbocharger typically costs between 3000 to 7000 dollars depending on what features are used and what kind of power is needed for your bike.


How much horsepower does a turbocharger use from a diesel engine?

depends on the engine size