With a scan tool after repair.With a scan tool after repair.
Repair the problem and then reset it with an OBD2 scan tool.
Yo can not "change" an engine code. You need to repair what is causing the code.Yo can not "change" an engine code. You need to repair what is causing the code.
There are pages and pages of causes for a check engine light. You need to have it checked for codes with a scanner to know what to diagnose. After the repair you can clear the code with a scanner.
Yes, it does have an interference engine. So be sure to check and replace you timing belt often to avoid VERY costly repair.
When working on a car engine, it is important to have an engine diagram. A Dodge Stratus engine diagram can be found in a Dodge forum online, or in the repair manuals at Auto shops.
Check coolant level, repair any leaks. Check engine operating temp, replace thermostat if below 190 deg F. Check for proper operation of heater controls and repair as necessary.
You have to repair the cause of the light coming on in the first place. You will need to have the code read, repair the cause, and then the light can be shut off with the scan tool.
A flashing check engine light is an indication of an engine misfire.
According to Haynes Repair Manual, code 32 means "EGR system" and will activate the Check Engine only on California models.
You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
After reading the codes, with a scanner. You repair cause of code, and then can reset code with the scanner.