To remove the alternator from a 1999 Oldsmobile Alero, first disconnect the negative battery cable to avoid electrical shocks. Then, remove any components obstructing access, such as the air intake hose or serpentine belt. Loosen the bolts securing the alternator and carefully disconnect the electrical connectors. Finally, lift the alternator out of its mounting bracket.
how to removel oil pan for oidsmobile alero 99 and how many bolts have to remove
To remove the alternator from a 1999 Oldsmobile Alero, first disconnect the negative battery terminal to prevent any electrical shorts. Then, remove the drive belt by loosening the tensioner pulley. Next, disconnect the electrical connectors from the alternator and unbolt it from its mounting bracket. Finally, carefully lift the alternator out of the engine bay.
you can remove the horn relay in the fuse box.
unplug electrical connectors. remove drive belt. remove alternator mounting bolts and remove alternator. installation is reverse.
Begin by removing the belt from your 1999 Mitsubishi Eclipse alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
First, remove the negative battery cable. Then remove the wires off of the alternator then the bolts that hold it on and then remove the alternator. The schematic for the serpentine belt should be on the fan shroud. If not, draw one before removing it. Don't rely on memory.
i have a 4cylndr 99 old alero gx and it requires 5w30
Drive the car to you local auto parts store and have then check the charging system.
On a 1999 Oldsmobile Alero with a 4-cylinder engine, the alternator is located on the front side of the engine, near the top, slightly towards the driver's side. It is mounted on the engine block and can be accessed from the top of the engine compartment. You may need to remove the serpentine belt to replace or service the alternator.
It is integrated into the alternator, if it is bad you will need to replace the alternator.
You will have to use an Easy Out to remove the old broken bolt.
* Disconnect the negative battery cable.If the vehicle is equipped with a delco loc 2 or theftlock audio system make sure to have the activation code before disconnecting the battery. * Remove the drivebelt * Label and detach the wires from the backside of the alternator * Remove the mounting bolts and separate the alternator from the engine