Yeah I'm having same problem did you ever fugure it out?
You can remove the front brake drum, on your Kawasaki Mule 2500, by removing the wheel and axle. The brake drum will slide off.
Defective or out of adjustment brake light switch.Defective or out of adjustment brake light switch.
2001 #2500 series rubber gromet on backing plate , remove , parking brake adjustment shoud be visable . use brake adjusting tool to rotate star wheel on inturnal parking brake to losen P. brake. then remove brake rotor and pads check P Br. shoes alot of work! mike s.
A Kawasaki brake drum diagram can be obtained from most Kawasaki ATV dealerships. The brake drum diagram can also be found at most ATV parts stores.
I own a 2006 Mazda Tribute I. I am not a mechanic but I recently adjusted my E-brake, and this what I discovered... The E-brake adjustment nut is located under the E-brake leather cover (directly to the left of the E-brake lever). You have to remove the E-brake cover and tighthen the bolt to the proper adjustment.
To perform a hydraulic brake adjustment on a bicycle, first locate the adjustment knob on the brake lever. Turn the knob clockwise to tighten the brake and counterclockwise to loosen it. Squeeze the brake lever to test the adjustment and make further adjustments as needed until the brake feels firm and responsive.
It is the slot up top, just below the brake line.
The cable runs from the release under the dash to the adjustment bracket under the Silverado. Remove the nut at the adjustment bracket and disconnect the cable. Pull the cable at the dash end for some slack, and disconnect from the dash release. The cable can now be pulled out and replaced.
The brake light switch is either broken or out of adjustment. The switch is located above the brake pedal.
The rear brake shoes, on a Kawasaki 3010 Mule, will come off. When the brake springs are removed. Reverse the process to install new brake shoes.
To remove the front brake drum from a 2000 220cc Kawasaki Bayou ATV, first, ensure the ATV is on a stable surface and secure it with jack stands. Remove the wheel by loosening the lug nuts and taking off the tire. Next, locate and remove the retaining screws or clips securing the brake drum to the hub, then gently pull the drum off the hub. If it's stuck, you may need to tap it lightly with a rubber mallet to break it loose.
The 2001 Kia emergency brake can be adjusted with the emergency brake adjustment bolt. The adjustment bolt will be on the emergency brake pad.