check out this video
http://vids.myspace.com/index.cfm?fuseaction=vids.individual&VideoID=54993698
Replace rotor / cut rotor & replace brakes.
How much time is required to replace a front break disc rotor on a '93 Ford E-250 van?
Remove wheel Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub
Remove the wheel and tire assembly and the brake caliper then the brake rotor will slide right off.
To replace the front brake rotors on a Ford Freestyle, first, safely lift the vehicle and remove the front wheels. Then, take off the caliper by unbolting it and hanging it securely to avoid stress on the brake line. Remove the caliper bracket, then slide off the old rotor. Install the new rotor, reattach the caliper and bracket, and ensure everything is tightened properly before replacing the wheels and lowering the vehicle.
22mm is the minimum rotor thinckness for the front and 12mm for the rear's
remove brake parts after removing tire should slide right off
Should be stamped on rotor Should be stamped on rotor
The minimum thickness is cast into the rotor, either on the edge of the rotor or into the rotor hub.
replace front brake discs and pads.
To install a front brake pin kit on a 1994 Ford Aspire, begin by safely lifting the vehicle and removing the front wheel. Next, take off the brake caliper by unbolting it from the bracket and slide it off the rotor, then remove the old brake pins. Install the new brake pins into the caliper bracket, ensuring they are seated properly, and then reattach the caliper over the rotor. Finally, secure the caliper with the bolts, replace the wheel, and lower the vehicle.
To replace the front brake pads on a 2002 Ford Expedition, first, lift the vehicle and remove the front wheels. Then, locate the brake caliper, unbolt it, and carefully slide it off the brake rotor. Remove the old brake pads from the caliper bracket and compress the caliper piston using a C-clamp or brake tool before installing the new pads. Reassemble the caliper, ensuring everything is properly secured, and then reattach the wheels and lower the vehicle.