Tire pressure will not cause a check engine light.
The orange engine light means that your Saturn LS300 has a sensor that is signaling for a service. This could be an oxygen sensor, an oil sensor, or even a tire sensor.
If you do the service tire system light will always be on.
The service engine soon light means there is regular scheduled maintenance due on the vehicle. Oil change, tire rotation, transmission service, etc. All this is spelled out in your owners manual. This is different than the Check Engine light which means the ECU has detected a problem with the emissions system. You have to manually reset the light according to the instructions in you owners manual. Disconnecting the battery will not reset the light.
tire pressure uneven. consulting the manual is your friend!
Have vehicle scanned to determine the problem
No, the check engine light detects problems with the vehicle's emission systems.
The ST means it is a trailer service only tire. P is passenger and LT would be Light truck.
You can reset all systems by unpluging the battery coneections for a few minutes. I would suggest doing this any time you have an engine light or warning light come on as sensors are sensitive. If the light comes back on take it in for service.
Well, it costs around approximately five hundred dollars to repair check engine lights. However, I would recommend going to Canadian Tire to get it fixed though.
To reset the tire pressure light on a 2016 Scion iA, first ensure that all tires are properly inflated to the recommended pressure. Then, turn the ignition to the "ON" position without starting the engine. Press and hold the tire pressure warning reset button, usually located beneath the steering column, until the tire pressure light blinks three times, then release it. Start the engine, and the light should turn off if the tire pressures are correct.
To reset the tire pressure light on a 2007 Range Rover Vogue, first ensure that all tire pressures are at the recommended levels. Then, turn on the ignition without starting the engine. Press the brake pedal and hold the tire pressure monitoring system (TPMS) reset button, located under the steering column or in the glove compartment, until the light blinks and goes out. Finally, start the engine to confirm that the tire pressure light has been reset.
The problem could be many things. With the check engine light coming on, it could be an internal issue in the engine, or broken engine mounts causing the vibrations. The shaking could also be caused by a separate issue from the engine, including a loose tire, or an out of balance tire, or bad suspension.