0
What else can I help you with?
Which is best- 12 valve or 16 valve engine?
16 valve
Is a peugeot 206 xsi a 16 valve engine?
1.6 16 Valve engine
What is the valve lash on a 1.6 L 16 V engine?
What is the valve lash on a cummins engine 16 V
Can you replace a 32-valve 5.4 engine in a 1999 ford navigator with a 16-valve 5.4 engine from a 2001 ford f150?
nope has to be the 32 valve engine
Is a vauxhall 2004 1.6 16 valve engine the same as a 1999 1.6 16 valve?
No. Totally different engine codes between those years.
What is the valve clearance of 4d30 engine?
.16 of an inch both for intake valve and exhaust valve [cold]
Is the vw 2.0t fsi a 16 valve engine?
Yes the VAG (VW/Audi) 2.0t FSI is 16 Valve. The older 1.8t it replaced was the Audi signature 5 valve percylinder engine.
How do do I determine if my 1986 Mercedes 190e has a 16 valve engine?
The valve cover says 2.3-16. The trunk has 2.3-16 badges.
Does a 1996 clio engine have an interference engine?
yes both the 8 valve and 16 valve engines are interterence engines
How do you know which engine your 1995 Tracker has?
The engine code in the VIN will be a U for the 8-valve engine and a 6 for the 16-valve engine. My footnote for these also says the 1995 16-valve engine iis a California and New York model. The engine type digit is the sixth digit?letter in the VIN. Hope this helps.
Is a 16 valve engine a v8?
Depends....a 2 valve per cylinder V8 would have 16 valves. A 4 valve per cylinder 4 banger would have 16 valves. There are also 3 valve per cylinder V8s...which would be 24. The number of valves does not necessarily determine what engine it is.
How can you tell if a 1994 Geo Tracker is an eight or 16 valve?
16 valve engine not put in a Tracker till 1996. 1994 Tracker is 8 valve (but a Sidekick may have the 16 valve in 1994) Actually there were 16 valve Trackers before 96. I have an early 95 which is 16v version. I believe 16v engines started somewhere between 91-94. I do know that the valve covers usually state 16 valve when it is. ,the spark plugs in a 16 valve are waaayy down in the top of the engine,you need about a eight inch extention to get at them
