Depends on which vehicle. Most regular cars around 10mm. when new. Max wear is down to 2 mm. Any vehicle.
The minimum thickness of brake shoes on a 2002 Ford Focus LX is 0.32 inches. Whey they fall below this thickness, they lose much of their stopping power.
It is the safe and legal minimum thickness allowed for a brake rotor.
The 2001 Pontiac Grand Am minimum brake rotor thickness is .075. The minimum brake rotor thickness is a standard minimum. Certified mechanics cannot use the brake rotor when the thickness drops below this level.
In New York State, the minimum thickness for rear brake shoes during an inspection is typically 1/8 inch (or approximately 3.2 mm). If the brake shoes are worn down to this thickness or less, they must be replaced to pass the inspection. Additionally, inspectors may also consider the overall condition of the braking system, including any signs of damage or uneven wear.
The minimum thickness for rear brake shoes on a 2005 Ford Escape is typically around 1/16 of an inch (approximately 1.5 mm). It's important to regularly check the brake shoes for wear and replace them if they are at or below this thickness to ensure optimal braking performance and safety. Always refer to the vehicle’s service manual for specific recommendations and guidelines.
2004 ford explorer minimum rotor thickness
The minimum rear brake rotor thickness on a 1996 Lexus LS400 is 15mm.
The minimum front brake rotor thickness is three aids of an inch. When the rotor does not have the minimum thickness the auto mechanic replacing the brakes can not use the rotor.
The minimum disc brake rotor thickness specifications for the 2006 Lexus GS are:Front: 27mmRear: 16.5mm
The minimum thickness number should be cast into the rotor.
It depends if 4 WD or just FWD and what year model Generally: FRONT: Brake pad minimum thickness 3.0 mm (0.118 inch) Brake pad maximum taper wear (in any direction) 3.0 mm (0.118 inch) Brake disc minimum thickness (disc-drum system) 22 mm (0.866 inch) Brake disc minimum thickness (4-wheel disc brake system) 24 mm (0.944 inch) REAR: Brake Pad Brake pad minimum thickness 3.0 mm (0.118 inch) Brake pad maximum taper wear (in any direction) 3.0 mm (0.118 inch) Brake Disc Brake disc minimum thickness 11.0 mm (0.433 inch)
The minimum brake rotor thickness for a 2002 Mitsubishi Eclipse is 1.17 inches. When it falls below this thickness, braking performance will suffer and must be replaced.