For a 1978 Dodge Magnum, the fuel line from the carburetor to the fuel pump typically runs from the carburetor's inlet fitting directly to the fuel pump's inlet. The line is usually a metal or rubber hose secured with clamps. Ensure that the line is routed away from heat sources and any moving components for safety. For a detailed diagram, refer to a service manual specific to the vehicle or consult online resources dedicated to classic car restorations.
Diagram showing where the lines from the fuel tank go at the carburetor and the primmer bulb.
Go to this link and select your motor/carburetor... http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800cc478
I'm unable to provide a visual diagram, but I can describe the gas line connections for a Poulan Wild Thing chainsaw. Typically, there are two lines: one from the fuel tank to the carburetor (the fuel line) and another from the carburetor to the primer bulb (the return line, if applicable). The fuel line usually attaches to a fitting on the carburetor, while the primer bulb helps draw fuel into the carburetor for easier starting. For the most accurate diagram, consider consulting the owner's manual or a repair guide specific to your model.
To properly connect all of the vacuum lines on a 1985 Parisienne, you will deed a vacuum system diagram. the diagram is in the vehicles service manual, which is available at most auto parts.
The best place to look is a service manual for the vehicle.
Purge solenoid.
I have attached a link for the 91 B2200 vacuum diagram, it should be almost the same. Mazdatrucking.com is a great resource with lots of info on repairs.
these are on the front of the carburetor after the intake
The fuel line diagram for an '88 Yamaha Route 66 typically illustrates the path of fuel from the tank to the carburetor. It includes components like the fuel petcock, fuel filter, and the lines connecting these parts. Ensure that the lines are routed without kinks or sharp bends to maintain proper fuel flow. For the most accurate diagram, consult the service manual specific to that model.
The lines in each diagram represent an electric field. The stronger the field, the close together the lines are.
The 1999 Dodge intrepid brake lines schematics diagram shows the routing of each brake line. The diagram will show the brake line routing from the master cylinder to each wheel.
To route vacuum lines on a 1974 Dodge Dart, start by identifying the vacuum sources, typically from the intake manifold or carburetor. Ensure that lines are connected to the correct components, such as the brake booster, HVAC controls, and any emissions equipment. Use proper fittings and avoid sharp bends to prevent kinks in the lines. Finally, check for leaks and ensure all connections are secure for optimal performance.