Black is negative - Red is positive +
Red is positive(+). Black is negative (-)
Connect the positive (+) Red cable from the charger to the positive (+) post of the battery. Now connect the negative (-) Black cable to a metal part of the engine. Do not connect to negative battery post. Plug the charger in. Unplug the charger before removing the cables. Disconnect the negative cable first.
Connect the positive + red charger cable to the positive + red battery post. Then connect the negative - black charger cable to the engine somewhere. Most engines have something metal sticking up that you can connect to. Do not connect the negative charge cable to the negative battery post, always connect it to the engine.
You connect the cables BEFORE you plug in or turn on the charger. Positive (red) to battery positive first, then negative (black) to battery ground. Then you turn on your charger and set the timer.
You connect the batteries in series Red charger lead to one red battery terminal, then the black battery terminal of that battery to the red battery terminal of the second battery. Then black battery terminal of the second battery to the black lead of the charger.
I'm not sure what you're asking but maybe its this: Red is Positive (+) and Black is Negative (-).
The two wires which connect the timer switch on a Century 87423 battery charger are the red and black wires. The red goes to the positive connector while the black goes to the negative connector.
To charge the battery on a Suzuki XL-7, you can use a compatible battery charger. First, ensure the vehicle is turned off and connect the charger’s positive (red) cable to the positive terminal of the battery and the negative (black) cable to the negative terminal. Set the charger to the appropriate voltage and amperage, then plug it in and turn it on. Once charged, disconnect the charger in reverse order, starting with the negative cable.
To connect a charger to a Ford Transit 350 diesel van battery, first, ensure the charger is turned off. Then, connect the red (positive) clamp to the positive terminal of the battery and the black (negative) clamp to the negative terminal. If you're using a smart charger, follow the manufacturer's instructions for settings. Finally, plug in the charger and turn it on to begin charging the battery.
To connect a battery charger to a Citroën Xsara Picasso, first ensure the car is turned off and the charger is unplugged. Attach the positive (red) clamp of the charger to the positive terminal of the battery, then connect the negative (black) clamp to a suitable ground point on the vehicle or the negative terminal of the battery. Once connected, plug in and turn on the charger, following the manufacturer's instructions. After charging is complete, disconnect the clamps in reverse order: negative first, then positive.
It depends on the charger. The one I have, all you do is hook up the red clamp to the red pole on the battery, the black clamp to the black pole, then plug the charger in to an outlet. The charger has a gauge on it that tell you when the battery is fully charged. I don't know where to hook the charger
To charge the battery on a Chevy HHR, you will need to locate the battery in the engine compartment. Connect the positive (red) cable of a battery charger to the positive terminal of the battery, and the negative (black) cable to a solid, unpainted metal surface in the engine compartment to ground the charger. Follow the instructions on the battery charger to select the appropriate charging mode and ensure a safe and efficient charging process.