0
To replace the alternator belt on a 1991 Mazda MX6, first, ensure the engine is off and cool. Loosen the tensioner bolt and adjust the tensioner to relieve tension on the belt, then remove the old belt from the alternator and other pulleys. Install the new belt by routing it according to the belt diagram, typically found on a sticker in the engine bay. Finally, adjust the tensioner to ensure proper tension on the new belt, and tighten all bolts before starting the engine.
What else can I help you with?
How do you put on an alternator belt on 1991 Mazda mx6?
To install an alternator belt on a 1991 Mazda MX-6, first, ensure the vehicle is off and safely supported. Loosen the alternator mounting bolts to allow for adjustment. Route the new belt around the alternator and the crankshaft pulley, ensuring it sits in the grooves properly. Finally, adjust the tension by moving the alternator, tighten the bolts, and check the belt alignment before starting the engine.
2002 Mazda protege 5 alternator belt removal?
how do u replace alternator belt on 2002 mazda protege 5 stationwagon
How do you replace the alternator belt on a 1999 Mazda Protege?
Remove the power steering belt first then the alternator belt will go on.
How do you replace the alternator belt on a Mazda Protege 1995?
you have to loosen the top alternator bolt alowing the alternator to swing forward loosening the belt
What is the cause of squaling when the car accelerates?
usually the squealing is from the alternator or the alternator belt in most cases it is the belt try to tighten it or replacing
How do you change the alternator belt on a Mazda 323?
To change the alternator belt on a Mazda 323, first remove the right hand air shield under the can. Then locate the pulley tensioner of the AC and loosen the bolts on the pulley. Finally, remove the alternator pivot bolt under the alternator to remove the old alternator belt and replace with a new one.
How do you put the alternator belt back on a 1995 Nissan altima after replacing the alternator?
Relax belt by holding automatic belt tensioner with large socket and/or breaker bar
After replacing the alternator why would pulleys not turn?
Not enough belt tension.
How do you release tension on the power steering belt in order to change it on a 1994 Mazda Protege?
i need to change my alternator belt and don't know where the tension wheel is so i can take off the other belt to replace the alternator belt on my 94 Mazda protege 1.6l
How do you change the serpentine belt on a 1995 Mazda mx3?
on the alternator on top is a bolt losen that bolt and it will allow you to move alternator causing belt to losin
How do you change the alternator belt in a 1996 Mazda protege?
What bolts to loosen to put alernator belt on and how to put it on when a/c belt is on.
Why does the alternator belt keep breaking on 95 Mazda protege?
Reasons: Cheap Belt Too tight
