0
To reset the service engine light on a 2006 Honda Pilot, you can use an OBD-II scanner to clear the trouble codes. Simply connect the scanner to the OBD-II port, turn on the ignition, and follow the scanner’s instructions to erase the codes. Alternatively, you can disconnect the car's battery for about 15 minutes to reset the light, but this may also reset other electronic systems. Always ensure that the underlying issue causing the light to illuminate is addressed before resetting.
What else can I help you with?
How do you reset service light in 2003 Honda Pilot?
How do you reset service light in 2003honda pilot
Reset check engine light 2005 Honda Pilot?
You can reset the check engine light on a 2005 Honda Pilot by disconnecting the battery for a few minutes. If it comes back on, you need to take it to have it checked or reset by a mechanic.
How do you reset service engine light in a 2005 Honda Pilot?
To reset the service engine light in a 2005 Honda Pilot, you can use an OBD-II scanner to clear the trouble codes that triggered the light. Alternatively, you can disconnect the car battery for about 10-15 minutes to reset the system. However, it's important to address the underlying issue that caused the light to come on before resetting it. Always consult a professional if you're unsure of the problem.
How do you reset service light in 2007 Honda Pilot?
I am not sure about the 2007 model. 2004-200 Models: The answer is in the manual. If you do not have the manual: After you turn on the engine, hold the trip reset button until the service remainder resets.
Reset oil light on 2006 Honda Pilot?
Turn key II position Press & hold Odomenter reset button until service light flashing. Press the reset button again for > 5 seconds The service oil life display will be reset to 100%
How do you reset 2008 Honda Pilot oil change light?
To reset the oil change light on a 2008 Honda Pilot, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and start the engine to ensure the oil change light has been reset. If it still appears, repeat the process.
How do you reset the check engine light for a 2005 Honda Pilot?
To reset the check engine light on a 2005 Honda Pilot, you can disconnect the negative terminal of the battery for about 15 minutes. This will clear the onboard computer's memory and turn off the light. Alternatively, you can use an OBD-II scanner to read the trouble codes and clear them, which will also reset the light. However, keep in mind that if the underlying issue isn't resolved, the light may come back on.
How do you reset check engine light 2007 Honda Pilot?
To reset the check engine light on a 2007 Honda Pilot, you can disconnect the car battery for about 15 minutes, which will clear the error codes. Alternatively, use an OBD-II scanner to read and clear the codes directly. If the light stays off after addressing any underlying issues, it should remain reset. Always ensure any necessary repairs are completed before resetting the light to avoid potential engine damage.
How reset oil life on Honda Pilot 2011?
Turn key II position Press & hold Odomenter reset button until service light flashing. Press the reset button again for > 5 seconds The service oil life display will be reset to 100%
How do you reset maintenance light on 2009 pilot?
CALL THE DEALERSHIP
How does the service reminder light work on a Honda Pilot?
It is set to illuminate at certain intervals that coincide with service that needs to be done, it can be reset at the repair shop with the OBDII code scanner tool.
How do you reset the check engine light for a 2004 Honda Pilot?
I asked this forum for the answer and found it myself. I actually resorted to reading the owners manual. Here's the answer... -Make sure the engine is off. -Press and hold the RESET button on the Trip Odometer. -While holding this reset button turn the key until the dashboard lights come on (the Accessories position). -Keep holding the Reset button for an additional 10 seconds. -After 10 seconds the check engine light should go out. It is now reset. I tried this today and it worked. The light hasn't come back on yet. There are various reasons for the light coming on. In my case I needed an oil change and the mechanic forgot to reset the light when he was done. If you truly have a problem, it will come back on. That is wrong, that is how you reset the maintenance required light. Check engine light is a different light.
