answersLogoWhite

0

assuming you have a four stroke engine, is it possible that premix gas from a weed wacker was put in by accident. if not usually if the fuel was bad it wouldn't run right, blue smoke is usually caused by engine oil getting into cylinder, could be a simple as a severely clogged air filter or could need engine work

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you drain oil from a lawn mower?

To drain oil from a lawn mower, first locate the oil drain plug underneath the mower. Place a container underneath to catch the oil. Remove the drain plug and let the oil drain completely. Once drained, replace the drain plug and refill the mower with fresh oil according to the manufacturer's recommendations.


How do you empty the oil on the Briggs and stratton 4.5 hp lawnmower to refill it?

there should be a drain plug under the mower where the blades are. to fill it is on the top where you check the oil. there is a drain plug under the mower where the blade is. to fill it is where you chech your oil. Many mowers do not have a drain plug, simply remove the dipstick and tip the mower on its side and dump it out the filler tube into a proper container.


How do you drain oil from a push mower?

To drain oil from a push mower, first locate the oil drain plug underneath the mower deck. Place a container underneath the plug to catch the oil. Unscrew the plug and allow the oil to drain completely. Once drained, replace the plug securely and refill the mower with the appropriate amount of new oil.


How to properly drain lawn mower oil?

To properly drain lawn mower oil, first, warm up the engine by running it for a few minutes. Then, locate the oil drain plug underneath the mower and place a container underneath to catch the oil. Remove the drain plug and let the oil drain completely. Once drained, replace the drain plug and refill the mower with the recommended amount of new oil.


How do I properly perform the task of draining oil from a lawn mower?

To properly drain oil from a lawn mower, first, make sure the engine is cool. Locate the oil drain plug underneath the mower and place a container underneath to catch the oil. Remove the drain plug and let the oil drain completely. Replace the drain plug securely and refill the mower with the recommended type and amount of oil.


How do I change the oil on a Craftsman push mower?

To change the oil on a Craftsman push mower, first, locate the oil drain plug underneath the mower. Place a container underneath to catch the old oil. Remove the drain plug and let the oil drain completely. Replace the drain plug and refill the mower with new oil to the recommended level. Dispose of the old oil properly.


What should you do if kerosene was put in your lawn mower?

Drain the kerosene out and depending where the kerosene was put :If in the flue tank refill with gas :If in the oil reservoir refill with sea 30 w oil :If two stroke motor mix 2 cycle oil with flue and refill tank. Hope this helps.


How do you change the oil in a lawn mower?

On a push mower you take the oil cap off our drain plug out (which ever it has) and tip the mower on its side with the carburetor up. Once the oil is drained, refill it. Riding lawn mowers have an oil drain bolt on the bottom of the engine and you change the oil and filter kind of like a car


How can I change the oil in a lawn mower that doesn't have a drain plug?

If your lawn mower doesn't have a drain plug, you can tilt it on its side to drain the oil. Make sure the oil is cool, remove the oil fill cap, and tilt the mower so the oil drains out through the oil fill hole. Be careful not to tilt it too much or oil may leak out of the air filter. Once the oil is drained, refill the mower with the appropriate amount of new oil.


What if mixture of gas and oil for weed earter was put in your lawn mower what will happen and how to fix lawn mower?

It should not hurt it but it will fowl the spark plug if heavy oil mix. To fix the problem drain gas out of the lawnmower and refill with good fuel and clean or replace spark plug. It will probably make smoke for a little bit but that should fix it.


How do you change poulan pro riding lawn mower oil?

One should first start the mower and let the oil get warm. Doing this will ensure that not much of the old oil is left in the tank. Next place an oil pan under the mower to catch the oil and then pull the plug pin. Let the oil drain out and then put the cap back in place. Refill the mower with new oil and the job is done!


How can I effectively remove oil from a lawn mower?

To effectively remove oil from a lawn mower, first drain the old oil by removing the drain plug and letting it empty into a container. Then, clean the oil residue with a rag or paper towels. Next, refill the mower with fresh oil according to the manufacturer's recommendations. Be sure to properly dispose of the old oil at a recycling center or auto parts store.