0
The snap ring size for a 1993 Harley-Davidson FLSTF (Fat Boy) speedometer is typically a 19.5 mm outer diameter with a 1.5 mm thickness. However, it's important to verify with the specific service manual or parts catalog for your model, as variations can exist. Always ensure to use the correct size to prevent damage during installation or removal.
What else can I help you with?
How do you remove the snap ring from the front wheel?
Insert the tip of your snap ring pliers into the two tiny holes on the left and right hand side of the snap ring. Then press the snap ring pliers together fairly hard and pull out the snap ring. Note: Make sure you have snap ring pliers because snap rings are very tool specific.
What makes the speedometer snap on a 1989 Nissan Maxima?
rusty
How to remove a snap ring?
Use a snap ring pliers, available in various sizes -- try auto parts store.
How do I get my Captive Bead Ring on?
Pop the bead out of the ring , feed the ring into the piercing and snap the bead back into the ring. Simple
How do you remove snap ring on lower gear in chain case on a polaris xcp 440 sp snowmobile?
you take snap ring pliers and pinch it in then pull it out
What is c clip real name?
snap ring!
Remove riding lawn mower rear wheel?
most of them are , one bolt and a snap ring holding the tire so you need some snap ring pliers
What is the function of snap ring?
Snap rings hold ball-bearing race in place. Internal ring supports axial thrust of axle. External ring aligns Inner race against shoulder of shaft.
Is there a snap ring holding ball joint in lower control arm on a Chrysler sebring?
Yes, the lower ball joint on a Chrysler Sebring typically has a snap ring that secures it within the lower control arm. This snap ring helps keep the ball joint in place and ensures proper function. It's important to check the condition of the snap ring during maintenance or replacement to ensure safety and performance.
Who is a recommended manufacturer of snap ring pliers?
A recommended manufacturer of snap ring pliers is Mastercraft. They are easily accessible in any major tool/hardware store and they are affordable at a cost around $20.
How do you get the retaining ring back on the front axle of lawn mower?
you probably need a pair of snap ring pliers
Why is a snap back hat called a snap back?
It is called a snapback because u can snap the size of your head in the back.. Snapback :)
