To align the timing marks on a 1990 Chrysler New Yorker with a 3.3-liter engine, first ensure the engine is at top dead center (TDC) on the compression stroke for cylinder one. The timing marks on the crankshaft and camshaft pulleys should align with their respective indicators on the engine block. If they are not aligned, rotate the crankshaft an additional full turn until the marks line up correctly. After the timing marks are aligned, verify that the ignition timing is set according to specifications.
The sprockets have marks that line up with marks on the case.
There are marks on the cam and crank sprockets and plated links on the chain that they line up with.
Clinton's manual says 12B(MT) & 12B(AT).
timing marks are , marks on camshaft sprocket, an on crankshaft sprocket'.
go to www.enginebuildermag.com/.../timing_chain_installation_procedures_on_19982002_chrysler_27l_dohc_engines.aspx - It has diagram & instructionsThe marks on the sprockets line up with plated links on the chain.
3.0 liter timing chains marks
The 1988 Mitsubishi 2.0 liter engine timing marks can be found on the front main pulley. The timing marks will be scattered around the outside of the pulley.
Your 1998 Mazda 3.1 liter engine does not have timing marks on the crankshaft. The timing marks are on the engine flywheel.
If you are aking about the timing marks on the belt/chain. Then yes.If you are aking about the timing marks on the belt/chain. Then yes.
Where are the timing marks on a 1992 Toyota Paseo 16 efi 1.5 liter engine?
timing are marks are on the cam and cranshaft pulleys all u need to do is line the marks up timing are marks are on the cam and cranshaft pulleys all u need to do is line the marks up
The Chevy Cavalier 2.2 liter engine timing marks can be found on the main pulley. The timing marks will be scattered around the outside of the pulley.